Last Activity:05-15-2012 8:25 PM
Posted in thread: Frigidaire Model FRC445GB Mini-Fridge Kegerator Conversion on 04-07-2010 at 03:18 AM
Hi, I'm new to kegerator conversion and homebrewing, so naturally I have a few questions.
Please excuse my ignorance. My initial intention for this machine is to run two commercial
D-system kegs out o...
Posted in thread: Frigidaire Model FRC445GB Mini-Fridge Kegerator Conversion on 03-17-2010 at 12:44 AM
I haven't seen any pics with a sixth in it yet so thought I would post. Just finished my build
this weekend. As you can see ...its a little tight with the way the line comes out of the tap,
I think I ...
Posted in thread: stupid nub kegerator question on 03-16-2010 at 11:31 PM
The lines are about 5 feet...but a foot and a half or so of that is in the tower\copper
line...I might have been able to siphon a little in to the lines...and then maybe connect it to
the keg...and le...
Posted in thread: stupid nub kegerator question on 03-15-2010 at 11:25 PM
Thanks guys...any thoughts on how i can run water through the lines?
Posted in thread: stupid nub kegerator question on 03-15-2010 at 11:05 PM
Hello all. I just built a kegerator with a kit from beveragefactory. I've never used kegs
before so I'm new to all this. I picked up a keg from total wine and I'll be hooking it up in
couple hours. Do...
Posted in thread: My Frigidaire Kegerator Build on 03-13-2010 at 10:59 PM
my dremel told these things to f off
Posted in thread: Kegerator Conversion Kit on 03-13-2010 at 08:03 PM
I started to do this conversion but hit a snag. I plan to run my lines through copper tubing as
others have but found that i had these step, or pex fittings on my lines: with these is that