Last Activity:11-24-2013 8:00 PM
Likes Given: 1
Posted in thread: Thoughts on persistent boil over on 10-25-2013 at 02:08 AM
Boiling 12-13 gallons in a 15.5 gallon kettle is the biggest problem. I start with about the
same amount of pre-boil wort but use a 20 gallon kettles and still have to stir and
watch.There's only so m...
Posted in thread: Thoughts on persistent boil over on 10-24-2013 at 09:17 PM
Thanks for the responses! I'll try it even lower in manual,
Posted in thread: Thoughts on persistent boil over on 10-24-2013 at 09:14 PM
This. When the alarm sounds, watch it come to a boil and then dial the manual mode down to as
low as you can go while maintaining a good boil. If you are boiling over at 50%, you still have
quite a l...
Posted in thread: Thoughts on persistent boil over on 10-24-2013 at 03:46 AM
Last 2 brew days I've had persistent boil overs.Equipment is -Auber Instruments PID1/2 barrel
keggle5500 W ULD element. I was boiling 12-13 gal in either manual (@50%) or auto (212) both
resulted in r...
Posted in thread: Anyone tried other brands of "oxy" cleaners? on 10-21-2013 at 02:45 AM
Ive used Sun "oxygen" that I found cheap @ big lots. Ive used it to soak glass carboys, Better
Bottles and keggles with no issues.
Posted in thread: heating element question on 10-21-2013 at 02:32 AM
I cut them off flush
Posted in thread: How and where did you mount your control box? Pics please on 10-11-2013 at 11:38 AM
Wall - with the mounting brackets that came with the enclosure attached to studs with 1/4 lag
Posted in thread: Any carboy cleaning tips out there? on 10-03-2013 at 12:29 AM
Posted in thread: Bagging hops in BK on 09-26-2013 at 04:58 PM
bagging with no effect on the element.
Posted in thread: Heating element hole size on 09-26-2013 at 01:39 AM
Yes 1-1/4 radio, Just say NO To the conduit punch. I made the mistake