Last Activity:05-04-2013 5:06 PM
Posted in thread: Ordered 5/16" beer line instead of 3/16"... on 05-03-2013 at 03:07 AM
thanks day! I hate to waste 15 bucks but you are right...i think that I would wind up killing
someone if my Southern Tier 2x IPA was coming out all foam...i'm such a dope :-(
Posted in thread: Ordered 5/16" beer line instead of 3/16"... on 05-03-2013 at 02:49 AM
Am I going to see a big difference in my beer? Trying to see if the seller from Ebay will swap
it out. Any replies would be greatly appreciated!
Posted in thread: co2 keeps spiking!!! on 12-04-2011 at 12:03 AM
thanks! i turned off the co2 for the time being so I guess we'll see where i am with that....
Posted in thread: co2 keeps spiking!!! on 12-03-2011 at 10:49 PM
so i had a problem with constantly running out of co2, checked all my fittings gave it a squirt
of dish detergent and warm water, no bubbles...no troubles!problem is now that my co2 gauge is
Posted in thread: $10 Tap line cleaning system. on 01-25-2011 at 06:05 PM
How does your beverage line come out of the Sanke? I set my Sanke up with flare fittings so I
could switch those lines over to corny kegs if I needed to. So, my hose ends in a female flare
Posted in thread: $10 Tap line cleaning system. on 01-25-2011 at 05:47 PM
I just disconnect the line from the Sanke tap and screw on a beverage out disconnect and clean
them that way. I then disassemble the Sanke head and soak it overnight in PBW or
Posted in thread: $10 Tap line cleaning system. on 01-25-2011 at 05:00 PM
could someone tell me what part i would need to hook up to a standard sanke beer line? I have
looked all over for a male adapter but no such luck. Either I am a complete moron (please dont
answer) or ...
Posted in thread: $10 Tap line cleaning system. on 01-20-2011 at 12:29 AM
that looks awesome. I was thinking of using my compressor but this looks even better. would
this work on a standard meister? would it attach at the tap or at the faucet?
Posted in thread: Pouring Question on 02-26-2010 at 09:43 PM
In addition, I am wondering if by having the washer upside down, if it has caused the beer to
get a little flat.
Posted in thread: Pouring Question on 02-26-2010 at 05:45 PM
ok, after a complete cleaning...i mean COMPLETE. It seems to working. I think that I discovered
the problem. When I got my keg of Storm King, I also got some "keg" lube. I disassembled the