VIEW MY

btprice2001

Gift Premium Subscription To btprice2001

Join Date:

01-13-2010

Last Activity:

07-11-2012 8:26 AM

    ABOUT ME

  • Redondo Beach, CA
  • Male
  • Married

LATEST ACTIVITY

  • Posted in thread: Using the regulator off of an Avanti? on 08-07-2011 at 03:45 PM
    I did find the right fitting to replace the push-to-connect fitting; it is a 1/8" BSPT. I
    ordered a barbed hose fitting from McMaster, 1/4" hose ID x 1/8" BSPT male pipe.

  • Posted in thread: Using the regulator off of an Avanti? on 06-11-2010 at 01:50 AM
    This is funny, I'm actually trying to do something with the regulator from the Avanti mini
    kegerator too! I've used the 5L kegs for homebrew, and they work quite well, so I wanted to
    create a more por...

  • Posted in thread: Boston Lager Clone (Decoction/Krausening AG recipe) on 05-07-2010 at 07:16 PM
    Any updates on how this turned out?

  • Posted in thread: 5L mini kegs on 05-04-2010 at 04:28 PM
    I reuse 5L kegs for my homebrew and I've found that there are two types of vent bungs used in
    commercial 5L kegs. One type is a three-piece unit and is much easier to remove. The other is a
    two-piece ...

  • Posted in thread: Cheap & Easy 10 Gallon Rubbermaid MLT Conversion on 04-14-2010 at 11:34 PM
    I couldn't find this mentioned anywhere in the thread; what keeps it from leaking from the
    inside between the female barb adapter and the stainless steel washer? Does the original spigot
    seal get comp...

  • Posted in thread: Where to find Pliny the elder in LA on 03-24-2010 at 04:59 AM
    $4.99 each which I think is high.

  • Posted in thread: Where to get Pliny in SF, CA on 03-23-2010 at 08:25 PM
    I just bought three bottles at Bristol Farms.

  • Posted in thread: Where to find Pliny the elder in LA on 03-23-2010 at 08:24 PM
    I just bought three bottles at Bristol Farms (Manhattan Beach).

  • Posted in thread: I Can't Stand Cloudy Beer on 03-21-2010 at 02:00 AM
    I used Whirlfloc for the first time with the batch I brewed yesterday and what a difference it
    made! I got a crazy amount of break material and very clear wort going into the fermenter.

  • Posted in thread: New aluminum brew kettle on 03-19-2010 at 04:44 PM
    The oxide layer on my aluminum pot is pretty close to black in color. Also, I started using it
    before creating the oxide layer and the acidity of the wort prevented it from developing. After
    two batch...

0 COMMENTS
POST A COMMENT