Gift Premium Subscription To bryanooo

Join Date:


Last Activity:

03-20-2014 5:57 AM

2 Likes on 2 Posts 


  • Single
  • Vancouver
  • Wa


  • Posted in thread: HomeBrewTalk 2014 Big Giveaway on 03-08-2014 at 06:40 PM
    I'm in:ban:

  • Posted in thread: Would this work as a beginner boiling pot? on 01-20-2014 at 11:13 PM
    I started with a five gallon. Then got an eight. Then got a twelve. If I could have read the
    future I would have started with the twelve.

  • Posted in thread: Disappointed with Austin Homebrew Supply on 01-20-2014 at 11:09 PM = problem solved

  • Posted in thread: My BIAB brewstand on 01-20-2014 at 01:47 AM
    I actually got the steel from my work, it was going out for recycling. The ball valve on the
    end of the chiller gives me control over the flow and outgoing temp. The slightest adjustment
    on that valve...

  • Posted in thread: My BIAB brewstand on 01-19-2014 at 06:16 AM
    I'm into this thrumometer less than ten bucks. A brass nipple, two hose fittings, and a fish
    tank thermometer. 173218

  • Posted in thread: My BIAB brewstand on 01-19-2014 at 06:13 AM
    I just made a 26" x 20" platform out of 2" square steel and a crossmember for the chiller to
    rest on. Welded some swivel caster to the bottom. I welded on four short pieces vertical on the
    platform so...

  • Posted in thread: My BIAB brewstand on 01-18-2014 at 11:04 PM
    I've been doing all grain with a home built three tier stand for about five years. I tried BIAB
    and I was hooked. So I sold my stand and built this. Single tier BIAB stand. 12 gallon pot,
    basic camp c...

  • Posted in thread: which quick disconnect on 01-16-2014 at 06:17 AM
    Thanks for the info. I never even considered cam locks. New ones arrive on Friday.

  • Posted in thread: Newbie Question on 01-13-2014 at 07:33 AM
    Your pitching temp sounds ok to me. What yeast are you using? Different yeasts have different
    optimal temps. As for your cellar temp, if it gets any lower that might be too cold for most
    ale yeasts. I...

  • Posted in thread: which quick disconnect on 01-10-2014 at 08:16 AM
    Im considering going with quick disconnects. I was wondering if anyone knows the pros and cons
    between the stainless and the Polysulfone. Between a few online shops and my local shop
    (baders) I really...