Last Activity:04-16-2014 7:03 PM
Likes Given: 8
1 Likes on 1 Posts
Posted in thread: ChuckJaxFL's single tier, all electric build thread on 06-17-2013 at 12:14 PM
Wouldn't it make more sense to test this on a bread board first? It's been a few years since I
did any pcb work, but last time I quoted a prototype board it was a couple hundred bucks.
Posted in thread: Veterans discount- northern brewer on 06-07-2013 at 02:42 PM
wonder why the Blichmann exclusion?just not enough markup to justify the discount? or is
Blichmann prohibiting the veterans' discount on their products?not that they don't have the
right to. but it wo...
Posted in thread: Funky Buddha Brewery OPENING on 06-01-2013 at 03:11 PM
Links for the lazy:https://www.facebook.com/FunkyBuddhaBrewery
Posted in thread: Cornelius Kegs question on 05-30-2013 at 08:42 PM
The biggest functional difference is that ball lock typically have a pressure release valve
with a ring you can pull to release the pressure, while pin lock kegs typically have an
Posted in thread: cork pop on 05-30-2013 at 08:00 PM
If you can get them cold (refrigerated) and keep them that way it'll probably be ok. If not, as
others said above, you're going to need to stabilize those bottles.
Posted in thread: ChuckJaxFL's single tier, all electric build thread on 05-30-2013 at 04:59 PM
I've always found the best way to learn these things is by doing a project. Good luck, I'll be
watching this thread evolve.
Posted in thread: Prefered bottle orientation? on 05-30-2013 at 04:53 PM
Long term I would worry about your bottle caps. I know the outside of them will rust after a
week submerged in cooler water, not sure how the underside of the cap will react to constant
Posted in thread: Ran Out of C02 on 05-30-2013 at 04:40 PM
Pressurize your keg and spray it down with star san solution or soapy water. Look for bubbles,
especially around the lid o-ring, the pressure release valve and the the base of the posts. Lid
Posted in thread: Corny keg as air tank (somewhat OT?) on 05-30-2013 at 03:12 PM
Corny kegs are typically rated to 120-130psi, but you might want to consider an appropriate
de-rating because of age. How do you plan to regulate the output pressure from the keg? I know
none of my ai...
Posted in thread: Carbing 3 gal in 5 gal keg on 05-30-2013 at 03:00 PM
Not sure how the volume will affect things, but if you do over-carb it's easy to correct.
Biggest concern is to make sure you purge the keg with CO2 before filling, 2 gallons of air
could skunk a beer...