Last Activity:05-19-2014 11:22 AM
Posted in thread: Arduino Controlled Fermentation Fridge on 04-24-2014 at 05:42 PM
Did anyone else ever try to construct this project? I have It it prototyped and mostly working
except for I cannot seem to get the 2nd button that sets the temp to work. I don't really want
Posted in thread: Orifice size with SQ 14 on 12-13-2012 at 06:01 PM
So I just purchased a new Bayou Classic SQ 14 and used it for the 1st time last weekend. The
55000 btu burner seemed quite a bit slower at heating my 150ish wort to a boil than my older
Posted in thread: haier beer dispenser drilling on 09-29-2012 at 11:04 PM
I am wanting to widen the hole in the top of my haier beer dispenser kegerator for the draft
tower and I was wondering if there are any lines that I might want to watch out for on the
top?Never mind I...
Posted in thread: Draft tower cooling on 09-26-2012 at 09:05 PM
Have you measured the temp inside the draft tower since doing this? This would be ideal for me
if the temp drops enough.
Posted in thread: Disabling auto defrost on 08-29-2012 at 02:10 AM
A fellow brewer and I just had a discussion about this the other night as we're both getting
ready to build new kegerators. We'll be using external temperature controllers on the freezers,
so the powe...
Posted in thread: Disabling auto defrost on 08-27-2012 at 05:16 PM
Hello,I have a haier kegerator with auto defrost on it. I have searched here and google and
cannot find a thread on it, but I remember seeing somewhere about attaching a timer to the
fridge and that w...
Posted in thread: Can I replace this pressure valve? on 08-27-2012 at 05:08 AM
I soaked it for hours in oxy clean and it would not budge. I ended up having to drill it out..I
may grab one of those keg connection. I almost bought one when I placed an order during the
final four s...
Posted in thread: Can I replace this pressure valve? on 08-26-2012 at 09:48 PM
I just got this keg and it is leaking co2 even at 10psi through the pressure release valve. I
tried to get the valve out, but I was unable to.