BrianL

LATEST ACTIVITY

• Posted in thread: Any brew-software for Android? on 04-28-2011 at 10:35 AM
  Hit your menu button (the one with the four squares), click preferences and then scroll down.I
  still haven't imported any recipes yet, but I've gotten that far!

• Posted in thread: Brutus 10 regulator help on 01-29-2011 at 12:15 PM
  Yes, use 3/8" from the regulator to the burners. Most of the regulators you buy are for high
  pressure and the smaller lines work. I couldn't get much output from my burners until I
  upgraded the line f...

• Posted in thread: My new brew system, a brutus 10 with some nice modifications on 06-29-2010 at 05:34 PM
  Very nice write up.What orifice size do you settle on for your burners? I drilled 2 of mine to
  .094" and I've been testing another one around .080" I think I'm getting more btu out of the
  .094", but t...

• Posted in thread: Anyone every try PID on a Honeywell Solenoid? on 06-29-2010 at 04:08 PM
  I was e-mailing the guy from Auberins (very helpful) about the creep in temperaure I get in my
  mash tun after the burner shuts off. He said that he's heard of people setting the control up
  on PID (opp...

• Posted in thread: Fired up the new brewstand! Check out the build! on 05-08-2010 at 06:28 PM
  Here's my brewstand build. Fairly standard set up. I used BG14's coverted to low pressure lp
  and used Honeywell's and Auberins controllers for the MLT and the HLT. The small tank mounted
  between the k...

• Posted in thread: Brutus 10 regulator help on 04-28-2010 at 11:20 AM
  I used a Marshall 2 stage regulator HereI bought the tank adapter and had a local fluid power
  shop make me a 3/8" propane hose and put it together myself. You can buy low pressure regulator
  assemblies...

• Posted in thread: My new brew system, a brutus 10 with some nice modifications on 04-27-2010 at 07:07 PM
  Back to the burner orifice. I tried the .067 that you recommended (I think that was you!) in
  another post and wasn't happy with the burn. I ended up at .094" with a nice flame. I haven't
  done a boil t...

• Posted in thread: Copper tubing type for burners? on 04-27-2010 at 02:26 PM
  I did a couple searches and couldn't find the answer.Is the utility grade soft copper tubing ok
  to use on gas lines? I bought the L type for my pilot burners, but it didn't fit the
  compression fitting...

• Posted in thread: My new brew system, a brutus 10 with some nice modifications on 04-22-2010 at 01:28 PM
  Thanks! You almost have to build a "practice" brewstand to really figure out how you want
  things set up. Now that I'm almost done, I want to start over and change a couple dozen
  things.I plan on getti...

• Posted in thread: My new brew system, a brutus 10 with some nice modifications on 04-22-2010 at 11:56 AM
  How did you attach the pilot lights to the burners? Build looks awesome. I'm closing in on
  finishing my single tier...I think yours has the edge.I think I'm going to try using the 1/2"
  pipe going into...