Brewpatrol

Gift Premium Subscription To Brewpatrol

Join Date:

05-02-2009

Last Activity:

02-05-2013 2:33 PM

1 Likes on 1 Posts 

    ABOUT ME

  • Sacramento
  • Brewing beer
  • Lawman
  • Mike
  • Rock
  • Anything with Arnold and Deniro
  • Seinfeld
    2 and a half men
  • Books? Only Mags for me.
  • Vinnies Blind Pig Clone
  • Scotch Ale, Red Ale, ESB, Double Pale Ale, Kolsch
  • Male
  • Married

LATEST ACTIVITY

  • Posted in thread: Dry Hop trub issues... on 07-21-2011 at 07:04 PM
    So I have this IPA going that I racked to a secondary and then dry hopped with an ounce each of
    Amarillo and Cascade pellets. Been going for about 6 days and smells great. Was going to keg
    today but I...

  • Posted in thread: Keggle virgin on 06-11-2010 at 02:34 AM
    You certainly can! You can start any threads you would like. Just please keep in mind that
    someone (a moderator) has to spend half an hour rearranging all of the duplicate posts (not
    this thread, seve...

  • Posted in thread: Keggle virgin on 06-04-2010 at 01:06 AM
    Ok, will PBW also work because I have that already and I don't know where I could find bar
    keepers friend.I just cleaned the inside of 2 of my newest kegs last week and did the
    following: Cut the tops...

  • Posted in thread: Keggle virgin on 06-02-2010 at 05:13 PM
    I went to Lows last night and got all the wheels. I got the yellow backer pad, a course set, a
    medium set, a fine set and the polishing pads. I just need the polishing compound and I should
    be set to ...

  • Posted in thread: Keggle virgin on 06-01-2010 at 08:09 PM
    I found the Gator surface finishing disk pack at Lows.com and also the Gator grit polishing
    disc... Are these what I need? The Gator grit finishing pack comes with two discs, one tough
    sandpaper ane o...

  • Posted in thread: Keggle virgin on 05-28-2010 at 03:45 AM
    Do NOT use sandpaper. Watch Bobby's video and read that thread. You want to buy the Gator Grit
    stuff from Lowes. Its awesome. I'm in the process of polishing mine and they are almost to the
    mirror fin...

  • Posted in thread: STC Valves and Baso pilot valve ?'s on 05-21-2010 at 01:13 AM
    Thanks for all the links to the parts that would be needed. In case I go the STC 1/2" valve
    route do you know what voltage I would need if I were to go the basic route like Lonnie has
    with a valve and...

  • Posted in thread: STC Valves and Baso pilot valve ?'s on 05-20-2010 at 01:32 AM
    For what you would spend with both solenoid valve and Baso pilot you could get a standing pilot
    furnace valve for less, with fewer parts and nicer looking build in the end. You would need a
    120-24VAC ...

  • Posted in thread: My new brew system, a brutus 10 with some nice modifications on 05-20-2010 at 12:49 AM
    Awesome rig! Do your pilot valves only work with low pressure propane? I have the same burners
    but was going to go with an STC valve and a pilot valve for extra safety. Looks like you
    bypassed having ...

  • Posted in thread: STC Valves and Baso pilot valve ?'s on 05-19-2010 at 09:12 PM
    Forgot to mention that Bargainfittings is awesome! I was lucky to score 3 really nice kegs over
    the past couple weeks and placed a huge order for all parts needed to go weldless yesterday.
    $300 plus i...

Following Stats
0 COMMENTS
POST A COMMENT