- Posts 35
Last Activity:09-30-2014 6:48 PM
Likes Given: 2
2 Likes on 2 Posts
Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 07-03-2014 at 06:05 AM
Replacement cable found and it miraculously jumped back into action! Will leave for 30mins to
see what happens... Fingers and toes crossed ;)
Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 07-03-2014 at 05:53 AM
Thanks guys, will look at getting a replacement usb cable. Ah well back to the STC1000 for my
black rye PA that needs to go in pronto. Cheers :)
Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 07-03-2014 at 05:20 AM
Fuzze thanks for the quick reply. I've now set up a water bottle sitting on a heat pad to
stimulate an FV stuck the beer probe into it and let the fridge probe dangle freely inside
also. Activated a t...
Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 07-03-2014 at 02:47 AM
Hello all - this is my first post in what is now a very large and informative thread! a big
thank-you goes out to all that have gone before me and especially Fuzze for kicking it off!Ok,
I've put this...
Posted in thread: I know, another "is this an infection" from a new guy post. on 11-21-2013 at 11:25 PM
Looks fine to me also - as the others have said it's something left over from the brewing
Posted in thread: Mash In A Bucket system on 11-21-2013 at 11:22 PM
Sorry to hear...hopefully it's a one off problem and mine doesn't suffer the same fate any time
soon! and yes I agree it's one hell of a deal if you don't want to be mucking about with wiring
Posted in thread: Mash In A Bucket system on 11-21-2013 at 07:22 PM
My controller died over the weekend. The output stopped sending any power to the plug. Maybe
the ssr died. But then the screen went dead. YMMV. .Is this the same controller as in the OP?
as I've just ...
Posted in thread: where to buy high pressure CO2 hose? on 10-15-2013 at 08:57 PM
No worries, the ebay seller is great too and is always willing to help out if you have issues.
My regulator has a male out so there was no problem connecting it up - an adapter would do the
trick for ...
Posted in thread: where to buy high pressure CO2 hose? on 10-15-2013 at 08:27 PM
I bought the same one, tested it for 5mins in my Dual output regulator setup and it works fine.
I'm waiting for some spare time to finish my kegerator and then will finally put this bad boy
Posted in thread: Stir plate on 11-01-2012 at 07:28 PM
Stir bars are magnetic in that they are made of metal under a Teflon coating that can become
attracted by a magnet. They are not magnetically charged.The stir bar I bought was magnetically