Last Activity:01-22-2017 2:38 AM
Age:28 years old
2 Likes on 2 Posts
Posted in thread: Auber Contactor on 11-15-2016 at 01:37 PM
It is a 240v. I checked back at my order. augiedoggy I must have it wired up correctly. If it
doesn't matter which end then I'm ok. I'll have to get on with their tech support. Thanks for
Posted in thread: Auber Contactor on 11-15-2016 at 05:45 AM
I have 2 220v Auber contactors. I have them being feed with 2 hot's on one side then they feed
into my SSR's. I have it being turned on with a switch. I have no power coming out of the
contactors. It ...
Posted in thread: Control Panel & Elements on 09-28-2016 at 03:11 AM
Not a great idea to switch the input to a PID controller between two different applications. It
is unlikely a single set of PID tuning constants will be ideal for both applications. That
said, I have ...
Posted in thread: GFCI Breakers on 09-22-2016 at 02:57 AM
$99. Thank you Home Depot!
Posted in thread: GFCI Breakers on 09-21-2016 at 11:34 PM
I'm going to do a 50a 220v GFCI breaker in my main house panel. Run a 220v line to a 4 wire
receptacle. Then have my control panel plug into that. Inside of my control panel I'll have 2
separate 30a b...
Posted in thread: GFCI Breakers on 09-21-2016 at 04:27 PM
I'm not going to do a spa panel. I need to run a 220 line anyhow. So I'm just going to do a 50a
GFCI breaker in my main house panel. Thanks for looking out though craigmw.
Posted in thread: Control Panel & Elements on 09-20-2016 at 11:46 AM
I'll go with a 50a GFCI, 40a SSR's, and 30a breakers for each element within the panel. Thanks
for all of the help everyone!
Posted in thread: Control Panel & Elements on 09-20-2016 at 02:51 AM
Very good. So 25a SSR's should be more than enough for each element as well? Thanks for the
Posted in thread: GFCI Breakers on 09-20-2016 at 02:27 AM
I'm in the process of building my panel. I'm going to have 2 5500 watt elements also a 2 outlet
110v for 2 chugger pumps. I don't believe I will have both elements firing at 1 time. Probably
just an e...
Posted in thread: Control Panel & Elements on 09-20-2016 at 02:18 AM
Does anyone know how many amps these elements draw typically? I'm starting to build my panel
and I'm trying to figure out how big of a GFCI breaker I should have also I would like to put