Last Activity:08-06-2013 10:39 PM
Posted in thread: DIY Stirplate on 11-24-2012 at 02:36 AM
Sounds to me like your fan took a dive. When you rebuild it try to space the magnets farther
from the fan with a piece of PVC. Also build it with a stronger fan should help carry the extra
Posted in thread: Black Pug Coconut Porter... on 11-16-2012 at 06:35 AM
Thanks for the recipe! I made this a few months ago and it turned out very good. I bought a
fresh coconut, split it and cut it in to half inch chunks and threw it in the smoker. My LHBS
did not have t...
Posted in thread: How to attach wort chiller to all in one faucet? on 10-21-2012 at 05:45 AM
Yes, however I would use the threaded three way.
Posted in thread: Flow Sensors for beer tap monitor on 09-26-2012 at 04:37 AM
If you just want to see how much has been poured, I would measure by weight like these guys.
Posted in thread: Interesting idea on 07-27-2012 at 10:48 PM
you just need to let it sit for several days on 30#s it will get more and more carbonated. Its
not too much pressure that is causing the foam, it's that the gas is not fully mixed in the
Posted in thread: Interesting idea on 07-27-2012 at 06:33 AM
I have done both soda and soda water. I always have one on tap with my beers. I keep their reg
set to about 30 or what ever you like for that drink. After about a week it is fully carbed and
Posted in thread: shank hole size too big? on 07-10-2012 at 05:24 AM
I used a spade bit on my kegerator. It cut through the metal and insulation just fine. I had
the vacuum sucking the foam out of the door to help clear the waste. I did cut from both sides
and its very...
Posted in thread: Another fermentation chamber :) on 05-26-2012 at 10:47 PM
These are more expensive than the light bulb in a can but are non light heating coils for
reptiles. They work great for larger spaces or with a temp controller.
Posted in thread: Fuzzy white bugs on 05-26-2012 at 09:33 PM
+1 on the ladybugs. They are cheap organic and its truly amazing how many aphids they eat.
Posted in thread: Damn hydrometer! on 05-26-2012 at 08:26 PM
Honestly, you should get one next time you get a batch or are near the store. However, it is
not necessary to make tasty beer. I have brewed probably ~50 batches of AG and Extract without
one when the...