Rebel Brewer Giveaway!
Ooh pick me!Awesome giveaway!
Brewer's Hardware Frustration...
Lost_Arkitekt,Sorry to hear your brewday didn't go as planned. Normally we get orders out
quickly, but backordered items can delay them. We're a bit behind making some products at the
moment. We make ...
Hermaphrodite Stainless Couplers - who sells?
Can someone explain what these are used for?They are generally used to be welded into a vessel.
That way you can screw a ball valve directly onto a pot without having to use a hex nipple as
you would ...
High Flow CamLock Coupler X Barb from Brewers Hardware
Hi Guys!Seeing as how the biggest complaint with CamLocks had been the tiny ID on the coupler X
barb fittings, we invested in our own mold at the foundry that is making our new line of cam
and groove ...
Hi Guys,First off: My sincerest apologies for those of you that I've let experience my own
growing pains. Brewers Hardware is not running the way I want it to be, my communication sucks
right now and ...
Temp sensor fluctuation
Thanks for the compliment Malfet!Layne, I sent you the actual spec sheet from Vishay on the
thermistors used to build the probes and the coefficients I came up with and have been using
are here: BCS T...
Just finished my sculpture!
Really well done! I have to agree that dented edge is pretty cool.
5000ML (5L) stir plate build
Very well done!
Square Tubing Size
I built my first one out of 1X2 16 gauge (.065 wall). The rest I've built with 2X2 16 gauge.
Haven't tried 1.25 square, but I will say square tubing is much easier to fit up than
New 1/2" Full Bore Barb Fittings
After looking high and low for a 1/2" barb fitting that didn't choke down to 3/8", I finally
had one made: Side X side with a standard 1/2" hose barb: of bore diamters: full bore hose