- Posts 20
Last Activity:10-10-2010 7:30 AM
Posted in thread: Ran out of propane, what should I do? on 10-02-2009 at 03:04 AM
Can you pull the tank off of your grill?Borrow from a neighbor?
Posted in thread: How many gallons of EdWort's Haus Pale Ale have been made? on 07-22-2009 at 03:11 AM
5 for me too.....That makes 1962
Posted in thread: First Solo Brew! Edwort's Pale Ale (5 Gallons) on 07-03-2009 at 07:25 PM
I just brewed a 5 gallon batch of this myself today. Really seems like it's going to be a good
Posted in thread: I'm cooling my wort, and my thermometer broke, what do I do? on 06-27-2009 at 06:13 PM
Actually, I think the "rule of thumb" came from this scenario. If you can comfortably put your
thumb (sanitized, or course) in the wort, you should be good to go.
Posted in thread: Apfelwein Fermentation Temp Question on 06-14-2009 at 03:30 PM
I just finished up fermenting my first batch using EdWort's recipe and just left it in my
basement for a couple of months. The temp ranged from about 60-70 degrees. Nothing special. It
turned out scar...
Posted in thread: How do you drain the hop bag? At boiling temp?? on 06-10-2009 at 12:59 PM
I set up a ladder over my kettle after flameout, then just hang it from one of the rungs until
it's done dripping.
Posted in thread: over-carbonation???? on 05-03-2009 at 01:59 PM
The priming sugar that comes with the kit is pretty much the most you would ever need. Here's a
good article on how to determine how much you will want to use.A Primer on PrimingPutting your
beer in t...
Posted in thread: What do you do with your spent grains? on 04-06-2009 at 03:11 AM
Posted in thread: Project Monsterator on 03-30-2009 at 03:12 AM
May want to think about having it bead/sand blasted. Usually pretty cheap and will get all of
the rust out. Then hit it with some picklex or something, just to neutralize anything that
might be left.
Posted in thread: 40 qrt stockpot for 22.40 - >35.00 w shipping on 03-27-2009 at 01:37 AM
I noticed the same thing as I was boiling water in it for the passive oxide layer. Doubt I'll
fill it that high but a good fyi.