VIEW MY

BoulderBayBrewing

Gift Premium Subscription To BoulderBayBrewing

Join Date:

02-24-2009

Last Activity:

11-18-2014 11:32 AM

Likes Given: 1

1 Likes on 1 Posts 

    ABOUT ME

  • Winnipeg, Manitoba, Canada
  • Student
  • Dan
  • What the Helles
  • Male
  • In a Relationship

LATEST ACTIVITY

  • Posted in thread: Stc-1000+ on 10-11-2014 at 01:18 PM
    Thanks. I did order a 1% tolerance but I didn't think about the wattage until after I ordered
    it. Good to know that I didn't order the wrong one.Cheers!

  • Posted in thread: Stc-1000+ on 10-11-2014 at 12:53 PM
    What is the wattage of the resistor for the second probe? Is it 1/4W? Also Congrats
    Alpha!Cheers!

  • Posted in thread: Stc-1000+ on 10-05-2014 at 07:30 PM
    All the parts need for adding a second temp probe on the slow boat from China. Does anybody
    have any advice on adding the second probe? I've read through this thread and also the readme,
    so I understa...

  • Posted in thread: Stc-1000+ on 07-08-2014 at 11:51 PM
    I figured it out. I had the wrong com port selected. Once I figured that out, it worked no
    problem!

  • Posted in thread: Stc-1000+ on 07-08-2014 at 11:27 PM
    Currently trying to flash my stc-1000. I decided I'd try by holding wires on to the pins. The
    first time I tried to flash it, it seemed to start the process.... I had to send "d". when I
    did that, not...

  • Posted in thread: Stc-1000+ on 07-08-2014 at 09:13 PM
    Hey all, I've been reading through this thead, just bought an STC-1000 through Amazon.ca,
    seller Brainydeal, happened to be the right version of controller! Can't wait to get one of
    these babys up and...

  • Posted in thread: Extract Brewing with electricity on 06-16-2014 at 11:38 AM
    Thanks for the input everyone. Can't wait to get started on this! Sent from my iPhone using
    Home Brew

  • Posted in thread: Extract Brewing with electricity on 06-15-2014 at 03:44 PM
    Hey all,I'm about to take the plunge into brewing with electricity. To start I'm just going to
    have and electric boil kettle which has the typical 5500w element in it. It will be controlled
    by the sti...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 04-16-2014 at 05:09 PM
    Thanks for the info. I don't have the pi yet, but I'm told it's rev b but with 256 mb ram. I'm
    okay with it being slower to load, so it sounds like I'll use this for brew pi and get another
    one to run...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 04-16-2014 at 12:17 PM
    A friend of mine gave me a raspberry pi model b but with 256 instead of 512. Will this version
    be able to handle brewpi? I'm also planning to buy a new pi (512) as I want to use one as a
    media centre ...

FORUM SIGNATURE
On Deck: Saison, Blonde Ale and Gluten-Free Ale Primary: Secondary: Bottled/Conditioning: Drinking:
0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS