Last Activity:02-07-2017 8:58 PM
Posted in thread: Check Valve Question on 05-27-2014 at 02:13 AM
You want check valves on each line. I'm assuming that by distributor you mean a manifold. If
you don't have check valves on each line, you run the risk of ending up with beer moving from
one keg to an...
Posted in thread: Regulator issue: serving pressure at 0 but lots of pressure out of valve and tank pre on 05-15-2014 at 10:29 PM
The high pressure gauge though,that threw me off because its' displaying a WAY higher pressure
than i'm used to (almost double from where it has been even outside of the fridge) and that
started when ...
Posted in thread: Soda Keg priming on 05-14-2014 at 03:04 AM
Saw a UTube video that said 30PSI for 24hrs, 20PSI for 24hrs and 7PSI to serve. Does venting
the head space mean to pull up on the pressure relief valve before hooking up the CO2?Does
anyone know how ...
Posted in thread: You may cringe on 05-14-2014 at 02:58 AM
Unlike well-made craft beer and homebrew, mass-produced American-style lagers have, to me,
always tasted pretty much the same out of a bottle/can as they do coming from a tap. Perhaps
you can get by c...
Posted in thread: Extending Beer Lines with Couplers on 05-14-2014 at 02:47 AM
I bought a kegco kegerator with 5' of 3/16" line. I'm having a bit of trouble dialing it in to
proper temperature and pressure without foaming pours.The first thing I know to try is to
increase the le...
Posted in thread: Edgestar vs. Nostalgia vs. KegCo on 05-09-2014 at 09:17 PM
The collar probably has the same issue mine had. The snapring isn't seated correctly. They sent
me a new tower since I couldn't get the shank out.
Posted in thread: Anyone have Kegco K209B-2? on 05-09-2014 at 01:49 PM
I figured I'd post an update on mine as well.I tapped in a keg of Stone IPA on one of my taps
last weekend, and I'm having some foaming issues. I upped the length of the beer line to 10 ft,
and the is...
Posted in thread: Anyone have Kegco K209B-2? on 04-25-2014 at 05:40 PM
Thanks. Let me know if everything fits and I'd love to know if it has the hole for the C02 line
(this is really hard to find on most models). KI thought I answered this on the last page.I
have a 309, ...
Posted in thread: Will these cartridges work for the Genuine Innovations keg-charger? on 04-24-2014 at 03:32 PM
I don't think mine is exactly that brand, but it doesn't use the threads on the CO2 canister to
attach to the charger. The outer housing basically pushes the canister onto the post.TLDR; you
Posted in thread: Anyone have Kegco K209B-2? on 04-18-2014 at 09:18 PM
Have you tried the fix discussed in the last post in that thread? It sounds like differential
thermal expansion, which would explain that noise.I've heard no such pops on my 309.