VIEW MY

Bonas96

Gift Premium Subscription To Bonas96

Join Date:

01-28-2013

Last Activity:

07-22-2015 2:39 AM

2 Likes on 2 Posts 

    ABOUT ME

  • Male
  • Married
  • Avon
  • Indiana

LATEST ACTIVITY

  • Posted in thread: Keezer Freeze on 07-15-2015 at 01:01 AM
    You'll have to let me know if going lower helps. Most post I've read mentioned putting it on
    top of the hump for the compressor. Thanks for posting your results.That's what I will try,
    because that is...

  • Posted in thread: Keezer Freeze on 07-15-2015 at 12:37 AM
    I have a fan running at the top circulating air and I have an EvaDry, but still having issues.
    I may need to reseal, or try the fan lower to circulate in the obviously colder areas better.

  • Posted in thread: Keezer Freeze on 07-15-2015 at 12:30 AM
    Question to throw out for some feedback....I can't seem to keep my keezer from icing up on the
    inside. My temp is set to around 40F with my temp controller, but inevitably I end up with a
    very thick w...

  • Posted in thread: Blichmann Tower of Power on 03-28-2015 at 03:27 PM
    Is your BoilCoil 120v or 240v? I've read here and elsewhere that the 240v does a much better
    job.I have the 240...I guess the part I need to figure out how to use is the power control to
    moderate powe...

  • Posted in thread: Blichmann Tower of Power on 03-23-2015 at 04:46 PM
    I need some help here...just switched over to electric. I am using a 10gal Blichmann kettle
    with the Boil Coil and a Blichmann Electric TOP to control. I tried my first go at things
    yesterday with an ...

  • Posted in thread: Easy & Cheap Stainless Vent Hood on 01-20-2015 at 05:09 PM
    Has anyone figured a way to make the height adjustable? I have been looking into the Blichmann
    Breweasy and if I do, I would want the hood up and out of the way until I was ready for the
    boil, and the...

  • Posted in thread: Electric Brewing - Ventilation on 01-09-2015 at 06:11 PM
    I may have missed it but No basement windows? or are they glassblock...No windows in this
    unfinished section of the basement, only an exterior door. That said, the brew section may
    ultimately get fram...

  • Posted in thread: Electric Brewing - Ventilation on 01-09-2015 at 05:39 PM
    I have plunged....Stainless Steel Bowl VenTech Inline Fan Variable Speed Control I just have
    to figure out how to drill a hole or two in my house....will post pictures as the adventure
    unfolds!Than...

  • Posted in thread: Easy & Cheap Stainless Vent Hood on 01-08-2015 at 05:47 PM
    Glad I could help! I spent many hours searching for a decent looking hood to use for a
    centrifugal inline fan and stumbled across a mixing bowl.Here are some links of what I used:30
    qt mixing bowl: ...

  • Posted in thread: Electric Brewing - Ventilation on 01-08-2015 at 05:30 PM
    Another inexpensive option is to employ a rectangle Rubbermaid tote as your hood (Google:
    Rubbermaid exhaust hood brew). 247331I was going to use the SS bowl or tote idea but I just so
    happen to have ...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS