Last Activity:11-05-2013 6:53 AM
Posted in thread: Computer controlled single tier on 05-22-2013 at 08:39 PM
No, all the logic is in the backend, the last thing I want is to lose a recipe or state because
I refreshed the page right? All of the getting and setting is done via APIs, but I'm not sure
if they'd ...
Posted in thread: Computer controlled single tier on 05-22-2013 at 04:04 PM
I didn't post it because it's ugly, but since you asked... I've got to reroute stuff to be a
little neater obviously. I'd also like to get away from using a hard drive if I can help it.I
used the 10" ...
Posted in thread: Computer controlled single tier on 05-20-2013 at 08:24 PM
The solenoid valves are just the gas valves in the back and the water in valve. Those are from
valves4projects on ebay. The rest of the valves, the blue boxes are automatic ball valves, they
Posted in thread: Source an RTD on 05-06-2013 at 03:20 PM
Yep, you wuz right. I know you know you were right, but you know how men are. :)Heh, hopefully
it'll come in handy later, it's not wasted money it a future partially funded project.This
shows it as a ...
Posted in thread: Computer controlled single tier on 04-29-2013 at 07:09 PM
I was a trade show this weekend, check out the Beaglebone Black. I've seen that one and am
considering it. BeagleBoards had been expensive, but this one is very comparable in price to
the pi and is ...
Posted in thread: Built my Single Tier HERMS on lurking only. on 04-28-2013 at 04:38 PM
I'd recommend the wheels from Harbor Freight for what we're using them for. HF wheels are much
cheaper and although they're not as good they'll be fine unless we start racing these things.
Posted in thread: Built my Single Tier HERMS on lurking only. on 04-26-2013 at 03:47 PM
Great job. Now to get some beer out of it! Be careful. I ended up with 20 gallons in the garage
in just a couple weeks.
Posted in thread: Source an RTD on 04-26-2013 at 03:43 PM
Uh, why not? Unless you mean just buying the device doesn't work off the shelf - they are just
a three-wire RTD. All the eBay sellers I see put them in a sheath with some conductivity paste
and some p...
Posted in thread: Source an RTD on 04-24-2013 at 07:53 PM
Wouldn't mind knowing the answer to this too. I have a rock bottom ebay PT100 in my smoker and
it is rubbish. But the alternatives seem way more expensive.What about them was rubbish? Mine
all worked ...
Posted in thread: Computer controlled single tier on 04-23-2013 at 03:58 PM
I expect I'll be drawing my own shield in Eagle and having a batch of boards done by iTead.
I've had excellent luck & results so far with both. I've been learning/using Eagle as well to
design board f...