VIEW MY

bluedog_Brewing

Gift Premium Subscription To bluedog_Brewing

Join Date:

05-21-2010

Last Activity:

09-20-2014 7:07 AM

Age:

30 years old

Likes Given: 5

10 Likes on 7 Posts 

    ABOUT ME

  • Current Setup is 3 vessel e-HERMS w/ wooden sculpture
  • Oatmeal Stout
  • Lagunitas Hop Stoopid Clone
  • Empty
  • Barleywine, Pale Ale, IPA
  • I wish....Soon I hope
  • Male
  • Single
  • Charlottesville
  • Virginia

LATEST ACTIVITY

  • Posted in thread: Fridgenstein Side-By-Side Kegerator / Fermentation chamber on 03-17-2014 at 09:41 PM
    I also just created a side-by-side fermentation/serving set up using 2 STC-1000s. Freezer side
    is holding steady at 5C but I'v having trouble getting the fermentation side to hold at 19C.
    The temp kee...

  • Posted in thread: Side by Side Fridge Conversion on 03-08-2014 at 01:08 PM
    I'd like to again thank Bluedog on all his help with my side-by-side project. Without his help
    I wouldn't have completed my project.My SS Brewtech 7gal chronical finally came in and after
    cleaning and...

  • Posted in thread: Side by Side Fridge Conversion on 02-16-2014 at 11:19 PM
    Probably. But they look a bit thicker than the square one with multiple panes. That would
    reduce your usable space a bit.

  • Posted in thread: tri clover sight glass on HERMS build on 12-15-2013 at 01:49 PM
    cfrazier77,Is that the brewer's hardware tri-clamp element adapter? I am thinking about using
    one on a new kettle from brewer's hardware but am nut sure how low I can mount it in the kettle
    and still ...

  • Posted in thread: Side by Side Fridge Conversion on 11-23-2013 at 12:37 PM
    1. You won't need a third STC-1000 to control the heater since that device has both heating and
    cooling outputs. You don't even need to switch from heating to cooling mode, it is all done
    automaticall...

  • Posted in thread: Side by Side Fridge Conversion on 11-23-2013 at 01:54 AM
    Hello, I have read several others taking on similar projects and had a few questions before I
    start. I am new to brewing and decided to jump in the deep end with this project. I am very
    excited to get...

  • Posted in thread: Side by Side Fridge Conversion on 11-15-2013 at 11:12 AM
    Both these builds are really nice, an inspiration to say the least. I'm hunting for a SxS to do
    this to, much better solution than the complex chest freezer build I had been considering. I
    notice both...

  • Posted in thread: Side by Side Fridge Conversion on 11-15-2013 at 11:10 AM
    Randy,I found that my kegerator side would warm up fairly quicker so I tinkered with the
    setting till I was satisfied. I am using the following:Freezer Side:F1: 0.5, F2: 3.0, F3: 10,
    F4: 0Fridge Side:...

  • Posted in thread: Side by Side Fridge Conversion on 11-14-2013 at 11:32 PM
    Randy,I found that my kegerator side would warm up fairly quicker so I tinkered with the
    setting till I was satisfied. I am using the following:Freezer Side:F1: 0.5, F2: 3.0, F3: 10,
    F4: 0Fridge Side:...

  • Posted in thread: Side by Side Fridge Conversion on 11-13-2013 at 11:36 PM
    Randy,Did you get the cooling for both working? If you have any problems, let me know.As far as
    the tap mounting goes, I found this ebay seller ( who sells small pieces of stainless sheet
    metal and w...

0 COMMENTS
POST A COMMENT