Last Activity:01-22-2015 9:36 PM
Likes Given: 1
Posted in thread: Honeywell VR8200 power usage on 05-17-2013 at 01:54 PM
Yes, Namako, I would say the AT72D should work just fine. Looks like it's 24VA, which should be
plenty to run 2 controllers. Looks like HD also has a Johnstone PF42440 40VA transformer for
Posted in thread: Honeywell VR8200 power usage on 05-17-2013 at 01:48 PM
Agreed, nice answer, reynolds! That makes perfect sense.I ended up not finding the answer to my
question so I just bought one big enough to supply the additional 500mA.For reference, here's
the one I ...
Posted in thread: Side by Side kegerator / fermentation chamber on 03-21-2012 at 02:42 AM
What size fridges are you guys using? I'm planning to do something like this, but I'm not sure
how big I need to be able to fit four carboys, preferably 6.5 gallon glass. Or better yet, what
make and ...
Posted in thread: What size refrigerator fits four carboys? on 03-21-2012 at 02:40 AM
I've seen several peoples' builds of side-by-side fridge conversions to fermenting chambers.
I'm wondering what size fridge is big enough to fit four carboys (preferably up to 6.5 gallon
glass)? I am ...
Posted in thread: Carboy/ Keg Cleaner Giveaway on 06-23-2011 at 12:10 AM
Posted in thread: Keggle Tri Clover Dip Tube Solutions? on 04-19-2011 at 04:01 PM
maltose, that's nearly perfect, although pricey. The universal siphon starts from NPT and
adapts to tri clover, but I would prefer tri clover only. Sabco also makes a tri clover only
siphon, but they ...
Posted in thread: Keggle Tri Clover Dip Tube Solutions? on 04-19-2011 at 03:55 PM
samc, are you adapting all of your fittings (the compression and the 90 degree elbow) from a
NPT coupler welded into the side wall? If so, how often do you disassemble the MPT from the
coupler for cle...
Posted in thread: Keggle Tri Clover Dip Tube Solutions? on 04-19-2011 at 03:58 AM
I'm getting ready to have tri clover ferrules welded into some keggles for a brutus-like build.
Does anybody out there have a good solution for dip tubes in the HLT, MT, and BK using tri
clovers? I'm ...
Posted in thread: Honeywell VR8200 power usage on 04-12-2011 at 04:21 AM
I'm working on a Brutus clone that uses three Honeywell VR8200 gas controls. I'm trying to
figure out the amount of power required for the 110VAC->24VAC transformer. Although it will
probably never ha...
Posted in thread: Is your Brutus 10 clone stable? on 02-02-2011 at 03:10 AM
Thanks for all of the advice! Gotta love HBT. BB