Last Activity:05-05-2013 6:11 PM
Likes Given: 7
Posted in thread: what temp controller? froze my Keg on 05-05-2013 at 03:23 AM
hello guys, so i got my control unit installed and fully functioning. i have it hooked up for
air temp inside the unit, i have it set by 5 degree swing and 3 minute delay. should i set it
so that it c...
Posted in thread: what temp controller? froze my Keg on 05-03-2013 at 06:51 PM
thanks for the input everyone. well my kegorator was around 500 bucks so getting a $200
controller seems a little silly, im not in the brewing stages yet, im just trying to drink tap
beer. so the A419...
Posted in thread: what temp controller? froze my Keg on 05-03-2013 at 04:44 AM
I use the Johnson controller, and I've been happy with it. Pretty simple to set up.I did notice
last night however that my beer was dispensing 10 degrees warmer than what I had it set for
Posted in thread: what temp controller? froze my Keg on 05-03-2013 at 02:00 AM
hello guys, so i go to pour some beer today and got nothing, i looked at the keg and
disconnected the coupler and saw some ice under the coupler. i have a Haier Kegorator with a
cooling fan installed ...
Posted in thread: Kegerator Installation & Integration on 04-12-2011 at 07:30 AM
nice, i hope your going to install a tower cooler or your going to have some warm pours. also
my haier ran like crap until i installed a circulation fan inside.
Posted in thread: foam problem on 11-12-2010 at 06:21 PM
when the beer pours into the cup it sounds like a soda bubbling when i put it to my ear. when i
put in the keg i was still trying to adjust temp so at one point the keg was down to 30 F with
Posted in thread: foam problem on 11-09-2010 at 04:31 AM
the first beer is always flat and then the rest are ok, but its not even 5 mins later the same
thing happens again. i purged the keg completly. also when pouring the i feel its like spitting
out the b...
Posted in thread: foam problem on 11-08-2010 at 01:51 AM
No, you didn't overcarb the beer at that pressure/temp combo. You see the reason why people get
longer lines is due to the fact that per unit of line, you get a pressure drop and when you get
Posted in thread: foam problem on 11-08-2010 at 01:49 AM
any way to correct that problem or does everybody have the foam on the first cup?
Posted in thread: foam problem on 11-08-2010 at 01:43 AM
maybe after 10 mins i get foam again but not as much. did i overcarbonate the beer when i first
had it set at 13 psi? i think my beer line is about 6" long i dont know if thats ok but its