blackheart

LATEST ACTIVITY

• Posted in thread: Automated HERMS system on 02-19-2013 at 04:57 PM
  While boiling we recirculate through the HERMS in the exact same way that we plan on chilling.
  Right before reentering the kettle the wort can be diverted to a hose connected to the
  fermentor. We circ...

• Posted in thread: Automated HERMS rebuild on 11-26-2012 at 01:15 PM
  We have made a few modifications to our system. We have removed valve 1 as it is pointless to
  prevent water from the HLT from hitting pump 1 as water from HLT is the only thing pump 1 pumps
  and it has...

• Posted in thread: Automated HERMS system on 12-12-2011 at 08:04 PM
  Blackheart,First off, thank you so much for sharing your information. You two plus as well as
  alot of other folks here on the boards are just awesome. The wealth of information is amazing.
  Alot of spe...

• Posted in thread: Help wiring a fermentation freezer on 10-21-2011 at 03:49 PM
  I was talking about it with a friend, if it has a radiator like cooler that means that it does
  not have coils along its walls correct?If thats true, then I should be able to drill right
  through the ba...

• Posted in thread: Help wiring a fermentation freezer on 10-20-2011 at 06:43 PM
  marco

• Posted in thread: Help wiring a fermentation freezer on 10-18-2011 at 06:34 PM
  Anyone out there? I have two fermentors that aren't doing much fermenting...

• Posted in thread: Help wiring a fermentation freezer on 10-17-2011 at 04:04 PM
  Hey guys, we are working on two new fermentation freezers to hold our new Brewhemoth conicals.
  We have very similar Kenmore standing freezers to what deep six did here. we have a digital
  controller o...

• Posted in thread: We were on Make Live! on 05-12-2011 at 10:03 PM
  We made a video of our current 10 gallon brew system using the new BrewTroller 4.0. This video
  was featured on Make Magizines Make:Live web broadcast as well as youtube channel and podcast
  feed. Thoug...

• Posted in thread: Automated HERMS system on 04-05-2011 at 04:35 PM
  We had some initial issues but were able to straiten everything out. The first batch was a
  success with about 80%+ efficiency. We have yet to brew in auto mode and are brewing in manual
  mode until we ...

• Posted in thread: Sankey keg washing pump? on 03-18-2011 at 05:31 PM
  Exactly.... I have all sankey kegs so I just need the pressure from the pump using 1/2"
  tubing... Its going into a snakey keg tap... so their is no way to use a wand etc... I need a
  pump that can pump...