VIEW MY

bitterpeanut

Gift Premium Subscription To bitterpeanut

Join Date:

07-09-2009

Last Activity:

01-20-2012 1:48 PM

    ABOUT ME

  • Software Engineer in Test
  • Jeff Lovell
  • Male
  • Married
  • Portland
  • Oregon

LATEST ACTIVITY

  • Posted in thread: BG-14 Burners Needed on 01-18-2012 at 10:10 PM
    Williams Brewing.HURRICANE LOW PRESSURE BURNER (NO STAND) @ Williams Brewing

  • Posted in thread: How do I connect the dip tube from my false bottom to my ball valve? on 10-25-2011 at 06:57 PM
    Two more cents... Flare fittings.

  • Posted in thread: DIY Mashtun Thermowell - easy and cheap on 10-11-2011 at 07:25 PM
    Just wanted to post some pictures of my thermowell completed. I crimped and soldered the end.
    The thermowell sits around the 2gal mark on the tun. used a flare fitting instead of a
    compression fittin...

  • Posted in thread: Brutus Design Help- .120 or .062 Wall thickness? on 10-06-2011 at 04:15 PM
    Thanks for the input CoalCracker. I was planning on welding a coupler to the gas beam for
    threading purposes. Now I'm just stressing of which burners to use. ;)

  • Posted in thread: Brutus Design Help- .120 or .062 Wall thickness? on 10-05-2011 at 06:22 PM
    Chiming in on the thickness. I just ordered up my stainless I went between 0.120 and 0.063.
    Everything I've read is that people are fine with the 0.063, but I'm worried about my grinding
    skills and do...

  • Posted in thread: Weldless brew stand. on 09-30-2011 at 06:24 PM
    2) McMaster-Carr has the green powder coated steel. Has anyone used or seen this?Nice find! It
    is just as thick and comes in similar sizes. That pushed me a little further towards possibly
    building it...

  • Posted in thread: DIY Mashtun Thermowell - easy and cheap on 09-14-2011 at 08:24 PM
    Another big thanks going out to Walker!I just picked up all the parts today and I'm going to do
    the install tonight. I was hoping to find a cap for the 1/4 tubing instead of crimping the
    end, but no ...

  • Posted in thread: Going to Portland next week on 07-18-2011 at 09:03 PM
    Already been said, but the Horse Brass is a must stop. Personally I avoid OBF, too crowded for
    my tastes. I don't like waiting in line 20 minutes to get a beer.

  • Posted in thread: Fat Squirrel clone on 10-21-2009 at 01:48 AM
    Thanks for the updates and sharing. I'll brew this up soon with the -- looking for those "I
    wish it were Spring" days at the end of Winter -- in mind.

  • Posted in thread: Fat Squirrel clone on 10-19-2009 at 05:13 PM
    Are the oats flaked or malted?

0 COMMENTS
POST A COMMENT