Last Activity:05-03-2016 2:25 PM
Likes Given: 2
7 Likes on 4 Posts
Posted in thread: DIY Tap Handle? on 09-17-2015 at 12:26 AM
interesting. I did not know that. I knew it loaded up a bit, but not heard of it coming apart
as a result. it was a buddy's bench grinder. we'll look it that.
Posted in thread: DIY Tap Handle? on 09-14-2015 at 10:12 PM
for you penniless DIYer's out there like me, we used a bench grinder to get the wood dowel
close to shape and then fashioned up a poor mans lathe with a wood screw in one end and a nail
in the vice fo...
Posted in thread: DIY Tap Handle? on 09-14-2015 at 10:05 PM
ok, finished the Apache helicopter shell handle. here it is next to the AC-130 shell above.
second pic is the drill and tap of the primer pocket.
Posted in thread: DIY Tap Handle? on 08-09-2015 at 08:21 PM
here are my latest. green skull is a shift lever from Wally World, a spanner wrench(done on
this thread already), and a 30mm cannon shell from an AC-130 I got from a member here from a
real Mission in...
Posted in thread: crowns available on 03-18-2015 at 08:37 PM
they all found homes. thanks for the responses!
Posted in thread: crowns available on 03-05-2015 at 09:16 PM
Sterling- the smaller 2 were in the same spot. I had planted 2 rhizomes in each spot. these are
over 4-5 years old. the last one is of the sprouts getting ready to grow. every plant has these
Posted in thread: crowns available on 03-05-2015 at 09:14 PM
ok, they are up and here are the pics. Liberty, all are over 3 years old-
Posted in thread: Has anyone grown Neomexicana hops? on 03-05-2015 at 08:09 PM
I've been away on other pursuits for a while and just saw this thread. I have found plants in
the Jemez mtns. mostly males and a few female. growning on slopes above streams at about 8000
feet. a budd...
Posted in thread: crowns available on 03-05-2015 at 07:39 PM
I have tried liberty and sterling here and they don't do well. I need to dig these up and I'll
use my own rhizomes from my cascade and galena to put into their spots. these will do well in a
Posted in thread: Labels on Tap Handles on 01-13-2014 at 03:35 AM
I do a slight variation on that. I print the labels and laminate them. then just use a bit of
tape on a handle that looks similar to those you posted with out the chalk board part. I can
come up with ...