VIEW MY

billvann

Gift Premium Subscription To billvann

Join Date:

01-22-2013

Last Activity:

09-15-2016 2:04 PM

Likes Given: 3

5 Likes on 4 Posts 

LATEST ACTIVITY

  • Posted in thread: Show us your Kegerator on 08-19-2016 at 01:47 AM
    Here's a product, FastCaps, that can be used to hide the screws in the PVC boards.

  • Posted in thread: Show us your Kegerator on 08-17-2016 at 12:57 AM
    Sweet! Did they have fold down windshields? If so you could find one to hold your glassware.
    Willys 3b front clip I had kicking around. Still a work in progress through.

  • Posted in thread: Show us your Kegerator on 07-09-2016 at 05:36 PM
    Oh, I almost forgot. There's a 6" pine base board on all three sides that dresses up the bottom
    edge. The handrail screws go through that first before hitting the 2-by framing

  • Posted in thread: Show us your Kegerator on 07-09-2016 at 05:33 PM
    It is a handrail and handrail hardware. The key for sturdiness is to use bigger screws then
    what come in the package. I think they're just one size bigger. I opened the package at the
    hardware store a...

  • Posted in thread: Show us your Kegerator on 07-09-2016 at 01:15 AM
    Here's the inside layout with the regulators and CO2 tank. Real tight!

  • Posted in thread: Show us your Kegerator on 07-08-2016 at 06:16 PM
    I built a box around a Sears kegerator and an old commercial refrigerator. It's clad in knotty
    pine to match the adjoining bar. It's not attached and is on castors so I can move it. I have
    two taps, o...

  • Posted in thread: Kegerator Cold Box Using a Mini Fridge on 02-01-2013 at 09:24 PM
    @Thadius856, I thought folks would use the Johnson Controls unit because it's more accurate.
    And if I were to rip the fridge apart and just stick the cold plate in the box, I would have to
    either make...

  • Posted in thread: Kegerator Cold Box Using a Mini Fridge on 01-31-2013 at 03:17 PM
    @FantasticBastard, there are several posts on building a walkin coorler. Most use an air
    conditioner as the cold air source. One of the more complete threads is this one.

  • Posted in thread: Kegerator Cold Box Using a Mini Fridge on 01-31-2013 at 03:09 PM
    The side where the fridge sits will be open to allow ventilation and removal for servicing if
    needed. Perhaps I should consider adding a little more headroom above the frisdge and add a
    muffin fan to ...

  • Posted in thread: Kegerator Cold Box Using a Mini Fridge on 01-30-2013 at 07:57 PM
    Here's my rough plans on what OI want to build. Ideas? Comments?

0 COMMENTS
POST A COMMENT