Last Activity:12-07-2016 10:47 PM
Likes Given: 4
8 Likes on 8 Posts
Posted in thread: Grainfather!! on 12-07-2016 at 11:42 PM
As I understand it, once the new units start shipping with the new controllers, the price for a
new version is going to be adjusted up by the same amount as the new controller. About $149.
That's why ...
Posted in thread: Grainfather!! on 12-07-2016 at 10:32 PM
I asked the same thing when I bought mine recently. From my understanding, they aren't
available in the states with the new controller yet. The grainfather is available from the
grainfather website wi...
Posted in thread: Who's smoking meat this weekend? on 12-06-2016 at 09:09 PM
It turned out perfect, great smoke flavor, still very moist(except for the wings).Corky, I
think the point he was making was that if you cook poultry at a low enough heat to take 14
hours to be done w...
Posted in thread: Grainfather!! on 12-05-2016 at 02:23 PM
Get the spider. You will love it. I still get a cake of hop particles/hot break that builds up
on the filter but not enough to clog it. Actually seems to act like a filter. My wort going
into the ferm...
Posted in thread: Grainfather!! on 12-05-2016 at 04:13 AM
I use only about 1-2 gallons of water each time I wash/rinse. Makes it easier to lift and dump.
Don't forget to run Oxy or PBW through pump and circ arm and then water to rinse .
Posted in thread: Grainfather!! on 12-04-2016 at 05:59 PM
Easier to screw it off and clean it, probably. Anything you back flushed would end up in the
pump or filter and would come back up once you start the pump again.
Posted in thread: Star san on 12-04-2016 at 03:33 PM
... but my tapwater is so close to distilled that my 5-gallon buckets full never get
cloudy.Might be closer to RO than most but definitely not that close to distilled. Water is the
universal solvent. ...
Posted in thread: Grainfather!! on 12-04-2016 at 03:10 PM
Thanks Seabrew.Few things for discussion.Whats the deal with the discharge pipe fitting with
the spring and ball bearing? It won't allow water to be pumped past. That is actually a safety
Posted in thread: Drilling into a side-by-side fridge on 12-01-2016 at 08:51 PM
When doing my kegerator, I drilled a very tiny hole trying to just get through the stell on the
exterior. Then used a piece of coat hanger wire with a small L on it as a probe. Pushed through
Posted in thread: Dallas tap water temp in summer? on 12-01-2016 at 12:11 AM
Has anyone in or around Dallas (I'm in Plano) measured the temperature of tap/hose water in the
summer? Trying to decide if it would be worthwhile to get a better immersion
chiller...something like a ...