Last Activity:02-23-2013 8:23 PM
4 Likes on 3 Posts
Posted in thread: Bayou Classic 100qt Aluminum $42 Lowes on 05-22-2010 at 07:13 PM
Just ran out to my local Lowes, they said it's a seasonal item (I think around here they only
think of big propane burners and 7+ gallon stockpots for frying turkeys).
Posted in thread: Burner FAQ's Answered on 05-17-2010 at 11:31 AM
Current:Banjo KAB 4 Burner13 Gallonsno lidLP Bottle with 30psi regulatorcustom made wind shield
wrapped around entire burner base6 gallons from 60 degrees to 160 in 15 minutes.Noise level :
Posted in thread: How many gallons of homebrew in 2010? on 05-16-2010 at 11:09 PM
14292+10 NB's Wheaten Beatdown-------------------14302
Posted in thread: fittings for 3/8 od copper tube on 05-10-2010 at 07:37 PM
I stopped at Home Depot today to get some 3/8" sweat fittings, and all they had were 3/8" caps
and 3/8" couplings... nothing else. The guy there told me that HD is phasing out the 3/8"
Posted in thread: Show off your mash tun on 05-03-2010 at 08:54 PM
For the guys who use slits in their manifolds. Does the grain be set well and how much do you
vorlauf?I've done a 5 gallon American Wheat, a 10 gallon Dunkelweizen, and a 10 gallon
Multigrain Red... b...
Posted in thread: Show off your mash tun on 05-03-2010 at 12:58 PM
Here's my Igloo Ice Cube. I've only done 3 batch sparges with it... and it works perfect for my
Posted in thread: Wheat beer starter question on 04-29-2010 at 12:19 PM
I'm far from an expert, with only 12 brewing sessions under my belt, but here's what I would
do. Rather than risk some off flavors from the Amber DME, I'd smack the pack and see how fast
it pops up. I...
Posted in thread: Freezer Shelves...how much weight? on 04-28-2010 at 09:53 PM
Maybe a piece of plywood on the shelf to spread the weight around. Unless you're worried about
where the shelf mounts to the sides of the freezer, in which case, I'd use some 2x2's to make
Posted in thread: New Glarus Moon Man Pale Ale on 04-28-2010 at 12:24 AM
I've had two six packs of this, and I have to say, I really like it. I'm not a hoppy / IPA type
of beer guy, but this is really tasty. I'll drink this again and again.
Posted in thread: Anybody made a hoppy wheat? on 04-26-2010 at 04:30 AM
I made the extract kit of Wheaten Beatdown from Northern Brewer. It was hoppy and yet "wheaty"
at the same time, and was gone very fast.