Last Activity:04-18-2015 12:56 AM
Age:44 years old
Posted in thread: Spike Brewing 12.5 Gallon Conical Fermenter Giveaway! on 01-06-2014 at 02:54 PM
I believe it, just what I need
Posted in thread: Propane Burners on 03-07-2013 at 02:00 AM
Looking to upgrade my worn out turkey fryer burners. Any Recomendations? Currently using a 2
burner setup on a rims system very similar to a brew logic 2 tier rig.
Posted in thread: Propane Burners on 03-03-2013 at 02:24 PM
Looking to replace my current turkey fryer burners, they are very old and not working properly.
I am going to mount them to my rims setup. Any recommendations you have would be appreciated.
Posted in thread: Temp controller issue, honeywell on 01-12-2013 at 12:39 AM
I built a rims system similar to the brewmagic setup, I am having issues with johnson controls
temp controller that i used for rims hex (heat exchanger). I have it built out of 1 1/4
stainless and is ...
Posted in thread: recirculation issues........ on 10-10-2012 at 01:39 AM
Made two 10 gallon batches this past weekend, added rice hulls, adjust water to grain ratio and
re ordered the sequence for the start of the recirculation. Worked like a dream...... thanks
for your he...
Posted in thread: Oak aged Imperial stout on 10-09-2012 at 11:08 PM
I have been aging an imperial stout for almost 6 months. I have some oak barrel staves....
Looking for suggestions on adding to the stout. I have never done this before and would like
Posted in thread: recirculation issues........ on 09-27-2012 at 02:15 AM
Being the water and piping engineer that I am, "master plumber" I am always looking for maximum
flow; with that being said I have put myself in this predicement, I am new to the recirc idea,
but a hap...
Posted in thread: recirculation issues........ on 09-26-2012 at 02:31 AM
What's your process? The way I do mine is to open the mash-tun valve gently and moderately,
until the hose is filled liquid and no more liquid is coming out, at which point I open the
valve fully on t...
Posted in thread: recirculation issues........ on 09-25-2012 at 09:00 PM
I constructed a rims system very similar to the brew magic system. I purchased a nice false
bottom and stand from norcal brewing solutions. I have a march 809 inline pump. All piping is
either 1/2" id...
Posted in thread: Lookng for a good false bottom on 08-10-2012 at 10:33 PM
I have completed building my two tier brew magic clone brew rig. I bought a cheap false bottom
and when I tried to recirculate mash through rims hex, enough volume wasnt available to supply
pump and h...