Gift Premium Subscription To Bigfoot99

Join Date:


Last Activity:

05-01-2012 4:09 AM

1 Likes on 1 Posts 


  • Colorado
  • Male
  • Single


  • Posted in thread: How much for grain? on 07-24-2007 at 04:21 AM
    I recently picked up a sack of Rahr Pale Ale malt from a semi-local brewery for $20. Any time I
    head to a brewery/brewpub, I talk with the brewer and see if they'll sell to homebrewers. This
    place eve...

  • Posted in thread: Welding the ball valve directly? on 07-23-2007 at 04:27 PM
    What are you planning on doing if/when the ball valve should fail?

  • Posted in thread: Regulator decision? on 07-20-2007 at 02:33 PM
    Yarg, I saw the thread for those Surplus regulators earlier, but they're no good to be without
    a primary regulator...Anybody have a suggestion on finding a cheap one? Without skimping, of

  • Posted in thread: Regulator decision? on 07-19-2007 at 08:03 PM
    Can I make the tank regulator by buying one of the cheap reg bodies and a tank pressure gage?
    No. They are not rated to handle the pressure from the CO2 tank directly; only secondary
    pressure. I don't...

  • Posted in thread: Regulator decision? on 07-19-2007 at 06:28 PM
    What I meant by not needing to remove the dispensing line to force carbonate is that the
    easiest and most common (read cheapest) CO2 setup is to run tubing from the regulator to each
    keg, using barbed...

  • Posted in thread: Regulator decision? on 07-19-2007 at 05:40 PM
    Also take into consideration how you plan on carbonating your beer, and if you plan on having
    soda on tap. If you force carbonate, you will not need to remove the dispensing CO2 and adjust
    the pressur...

  • Posted in thread: sankey keg disassembly on 07-19-2007 at 12:23 AM

  • Posted in thread: Preventing Therminator clogging on 07-17-2007 at 10:03 PM
    You could buy a Hop Stopper. He has a PDF that shows it in use with the Therminator.

  • Posted in thread: Stainless Conicals on 07-14-2007 at 03:22 AM
    I've got one of the 14.5 Fermenators. The legs attach to the outside by bolts that are welded
    to the outside of the conical. Blichmann's claim of "weld-free" only applies to the inside of
    the conical,...

  • Posted in thread: High Temp Quick Disconnects on 07-12-2007 at 09:27 PM
    Just wondering why you put disconnects between your pump and hose. Assuming you use the pump
    for all transfers, wouldn't it be easier to use a cheap hose barb on both sides of the pump
    eliminating two...

Following Stats

Newest Threads