Last Activity:04-23-2016 10:41 PM
Likes Given: 3
6 Likes on 3 Posts
Posted in thread: BigDubz Big Basement (e)BIAB on 06-06-2015 at 08:00 PM
The current ventilation setup is a 6 inch inline fan hung above the kettle that blows out of
the one window in the basement. It's similar to the one shown at thelectricbrewery.com and I've
got a stain...
Posted in thread: wilserbrewer BIAB bags on 03-19-2015 at 12:44 PM
Thanks Cody,I improvised a similar idea with a stick that I cut a notch into at the water level
I wanted to maintain. Just got my new bag from Wiser yesterday and I'll report and compare when
I brew m...
Posted in thread: wilserbrewer BIAB bags on 03-13-2015 at 01:15 PM
I used a wilser bag recirculating mash eBIAB. It is the high gravity system so it utilizes the
basket and bag. I had absolutely no problems with drainage amd i ran the valve wide open for
the entire m...
Posted in thread: wilserbrewer BIAB bags on 03-11-2015 at 06:50 PM
bigdubz,While I don't know how fast you are trying to recirculate, or how fine your grain is
crushed, or many other variables of your system, I can say that I have never heard of this
Posted in thread: wilserbrewer BIAB bags on 03-11-2015 at 03:34 PM
Wilserbrewer,I'm using a bag made of poly voile right now and the problem I'm having is that
the mesh is so fine that when I pull the bag, I can still see liquid sitting on top of the
grains. This liq...
Posted in thread: Brad's eBIAB 240v recirculating rig on 02-25-2015 at 06:09 PM
Sorry, I missed your post. I used this stainless float ball from Amazon. Thanks much for
responding. I followed that link down the rabbit hole a bit and found another float that has a
23mm hole, which...
Posted in thread: BigDubz Big Basement (e)BIAB on 02-18-2015 at 03:48 PM
Maybe it doesnt matter much if its not sunlight but I thought its always a good idea to cover
the carboys with a dark tshirt of something if they are going to be left in the light?I've read
in a few p...
Posted in thread: BigDubz Big Basement (e)BIAB on 02-13-2015 at 08:23 PM
Going to add Window-to-Underground-Gun-Fighting-Pool as a phase 2 project.
Posted in thread: BigDubz Big Basement (e)BIAB on 02-13-2015 at 05:09 PM
I like the idea of no-chill, especially if I wanted to do back-to-back batches and get the
kettle cleared of the first brew asap. Right now I have a 50 ft immersion chiller that fits
beside the elemen...
Posted in thread: BigDubz Big Basement (e)BIAB on 02-12-2015 at 05:42 PM
My space is really limited. My 15CF keezer/ferm chamber is in the back left corner now and a
utility sink will be going in near that main drain line. So you see I have very limited room to