Last Activity:03-25-2012 1:57 AM
1 Likes on 1 Posts
Posted in thread: Carboy/ Keg Cleaner Giveaway on 06-01-2011 at 05:38 AM
I have seen this video before, and after trying to clean numerous carboys and kegs I don't know
why I haven't bought one yet? Please enter me into this contest..Thank you
Posted in thread: Weldless brew stand. on 05-27-2010 at 02:32 PM
Now that you made it from an erector set... a real man would do it again 2 more times, once
with Tinker Toys and again with Lincoln Logs...:mug:I wish the LEGO's would hold up to the
heat! j/k! But se...
Posted in thread: DIY Stir Plate Question on 05-12-2010 at 05:41 PM
I used one at first, it threw the stir bar more than I'd like to say. I balanced two magnets on
a fan and they have worked great for me!
Posted in thread: WTB Sparge Arm for a 10 gallon Igloo on 05-12-2010 at 05:32 PM
TBH, a flying sparge arm is mostly for show. Its not truly needed as long as you have a light
sprinkle on the sparge, as not to disturb the grain bed!
Posted in thread: WTB - 50' Immersion Chiller on 05-12-2010 at 05:29 PM
I built mine with a torch, home depot for $20, it came with flux, solder and a wire brush(its a
good thing to have for fitting copper tubing). I also picked up a 50 ft coil for $32.00 at
lowes. If you...
Posted in thread: WTB - 50' Immersion Chiller on 05-11-2010 at 10:59 PM
Have you thought of building one yourself? I did its really easy!![ame]
Posted in thread: DIY Stir Plate Question on 05-11-2010 at 08:41 PM
I had some old hard drives from a computer. I pulled two of them out of there.
Posted in thread: Opinions on digital temperature controllers? on 05-01-2010 at 11:55 PM
Thank you for the quick responses, I was wondering why the Coolbot was so much more in price.
If the only difference is the constant power to the AC unit, that is a huge cost?? I have seen
some DIY vi...
Posted in thread: Opinions on digital temperature controllers? on 05-01-2010 at 06:05 PM
I am planning on building two walk-in refrigerators. One will be at 68 degrees F, and the other
will be at 36 degrees F. I am on a budget, so as long as it works well and is inexpensive, that
Posted in thread: Welding 101 = Fun Brutus Build on 05-01-2010 at 04:38 PM
I had a question on the gas flexible hose. If the hookup on the hose is going directly out of
the burner, is there any pressure built-up? If no pressure is built-up, then the .5 psi gas
hose might wor...