Last Activity:06-28-2014 8:01 AM
Likes Given: 21
5 Likes on 5 Posts
Posted in thread: The Brew Stand Incredible Giveaway on 06-11-2014 at 04:56 PM
Posted in thread: Wort Monster Giveaway on 04-18-2014 at 04:46 PM
Posted in thread: Brew Stand Water Filter with Chiller Valve on 04-01-2014 at 11:31 PM
Now, on to the show...Here is what it looks like (I'm am quite happy with the
Posted in thread: Need gas line advice for my brew stand. on 04-01-2014 at 11:21 PM
Natgas is delivered in a low pressure state so I don't think the line diameter will effect
anything except the volume of gas provided. Because NatGas is delivered at low pressure, the
volume of gas ha...
Posted in thread: Show us your sculpture or brew rig on 04-01-2014 at 10:54 PM
Here is my current brew rig: Single tier, Natural Gas Fired, Bottom Drain MLT, HERMS. Kettle
on the left, Mash Tun in the middle, and Hot Liquor Tank / HERMS on the right. Image shown is
in 'sparge ...
Posted in thread: My HERMS with 'bottom drain' MLT on 04-01-2014 at 10:45 PM
I use an immersion chiller in the boil kettle, dropped in for the last 15 minutes. I have a
manifold on the wall for raw water supply. Water can be directed through filters (for filling
the kettles), ...
Posted in thread: My HERMS with 'bottom drain' MLT on 04-01-2014 at 10:20 AM
The Brew DayStart by filling the Hot Liquor Tank all the way up, and light a fire under that
bad boy. Even with the impressive heat from those burners, it still takes a fair bit of time to
get our 50 ...
Posted in thread: My HERMS with 'bottom drain' MLT on 04-01-2014 at 10:16 AM
The first image in this thread shows the setup with my original barrel sided boil kettle, which
served me well for many many brews. Since then, I got my hands on another straight sided keg,
Posted in thread: My HERMS with 'bottom drain' MLT on 03-31-2014 at 09:29 AM
rig has two burners, one on each end mounted under the Boil Kettle and Hot Liquor Tank. They
are "banjo" style burners, plumbed to the natural gas supply from the house. I made windscreens
for each ...
Posted in thread: My HERMS with 'bottom drain' MLT on 03-31-2014 at 09:28 AM
Before I started building this HERMS, I was originally planning on building another 2-tier
stand. Even spent hours learning markup and designing from scratch. Then, I had the great
fortune to stumble ...