Last Activity:05-23-2013 7:10 AM
Posted in thread: Stirplate build keeps throwing bar!? on 05-12-2013 at 03:35 PM
I got tired off f'ing with mine, picked up one from homebrewstuff.com and couldn't be
happier.... Great speed control, power for big starters, no issues and never wondering if it
was still stiring. No...
Posted in thread: Scored 3 kegs on 05-11-2013 at 10:49 AM
Awesome..... If the welds are not good take them out and get the soldering spud from bobby m...
You have got three good kegs, be cautioned, next thing you know you will have a stainless lined
Posted in thread: I need an engineer! on 05-11-2013 at 10:34 AM
I think 20* and I sunk them 3 ft in concrete. I used turnbuckles on both ends and on the
deadman. Have got to get my string up this weekend, the chinook already has 4 or 5 feet of
Posted in thread: I need an engineer! on 05-11-2013 at 12:00 AM
Last years growth was awsome, ran three lines per plant and did 2 bines per line at about 15 ft
height, so about 90 feet per plant. 2 chinooks, a centenial, a us golding, a willamette, 2
Posted in thread: I need an engineer! on 05-10-2013 at 11:46 PM
Think the line us 3/16 and coated with a blue plastic, here are the
Posted in thread: I need an engineer! on 05-10-2013 at 09:07 PM
My pipe is sucker rod, think it is the same thing you are talking about, they are 64 feet
apart, have had no issues
Posted in thread: I need an engineer! on 05-10-2013 at 06:35 PM
Yep, eye bolts drilled on both sides of the pipe, turn buckle hooked to that, cable hooked to
that, allows me to tension easily, will post a pic when I get home,
Posted in thread: I need an engineer! on 05-10-2013 at 04:40 PM
I did something similar, my poles are splayed out at a 20 degree angle, I used turnbuckles to
connect the support cable to the poles and another turnbuckle down to a deadman. I priced
aircraft cable a...
Posted in thread: Dual input, 4 element question on 04-10-2013 at 05:46 PM
Why couldn't you run two elements off one ssr/contacter, like wall outlets are done. Wire size
and supply would need to sized appropriately... Say 2 1500 watts and wire sized for 25 amps,
would prob b...
Posted in thread: Center Inlet Chugger Pumps Mounting on 04-04-2013 at 02:40 PM
Mine was slightly off, the mounting plate was bent slightly during shipping, straightened it
out and now sits perfect. Worth checking
- L14-30 & L6-30 flanged inlets, connectors, plugs, receptacles
- Heady Topper for Dark Lord & Other FFF
- Beginner extract brewing howto
- First homebrew competition and I got bronze!
- Calling All Metal Fans
- Show us your sculpture or brew rig
- Any ideas what is happening here?
- Clear beer into fermentor with plate chiller?
- 1-Gallon Brewers UNITE!
- New 100 Rhizome hop farm
- Easy Chimay Blue clone