VIEW MY

bessieflames

Gift Premium Subscription To bessieflames

Join Date:

08-04-2011

Last Activity:

02-18-2014 8:45 PM

Likes Given: 1

    ABOUT ME

  • BMC Clone (for a challenge)
  • London AlernDouble Mountain IRA ClonernVictory Pale AlernMulled Hard CiderrnLawnmower BelgianrnImperial Black IPA
  • Male
  • In a Relationship
  • Denver
  • CO

LATEST ACTIVITY

  • Posted in thread: Temp Controller Can't Read Air Temperature on 07-12-2013 at 07:59 PM
    I agree to some degree, but wouldn't you expect the temp (at least at the point where the
    sensor is) to remain essentially within the H and L setpoints of the controller? I would.IOW,
    with the probe i...

  • Posted in thread: Temp Controller Can't Read Air Temperature on 07-12-2013 at 04:15 PM
    Air temperature in a keezer has widely varying temperatures during cycling as well as
    temperature stratification if inadequate air movement exists. IMO, if you want to control the
    temperature of the b...

  • Posted in thread: Temp Controller Can't Read Air Temperature on 07-12-2013 at 04:11 PM
    Another interesting thing I found this morning: I had taped the probe to the keg last night and
    lowered the temperature to 40 degrees. THis morning I poured a small beer and it was 57
    degrees. The sec...

  • Posted in thread: Temp Controller Can't Read Air Temperature on 07-12-2013 at 04:15 AM
    I don't think it has anything to do with electric disturbance because it reads correctly when
    taped to my glass carboy. It can read correctly when touching a solid or liquid, but not a gas.

  • Posted in thread: Temp Controller Can't Read Air Temperature on 07-12-2013 at 03:26 AM
    As soon as I tape the thermocouple to the keg, it reads the correct temp. I think the probe is
    correct when touching water/beer.

  • Posted in thread: Temp Controller Can't Read Air Temperature on 07-12-2013 at 03:24 AM
    It has been in the keezer for weeks. I just recently noticed that my beers were being served
    warm (and undercarbed because the temp was higher than what I thought). I don't get it. My plan
    is to make ...

  • Posted in thread: Temp Controller Can't Read Air Temperature on 07-12-2013 at 03:15 AM
    I have 2 Ranco controllers, and I just noticed that they are way off when reading air
    temperature. Anyone else notice this? When I brew, I tape the controller to the side of the
    fermenter and cover it...

  • Posted in thread: Who wants a brew partner in the Boston area? on 12-10-2012 at 09:44 PM
    Hi all, I recently moved to Boston (Somerville actually) from Portland Oregon. I couldn't take
    my all-grain equipment with me but I still have a hankering to brew some beer. Is there anyone
    in the gre...

  • Posted in thread: Sour Advice on 10-21-2012 at 06:50 PM
    Thanks fro the response. Another question has to do with the trub. Should I ferment with US-05
    and then rack to secondary and add Roeselare so that it isn't sitting on the trub for a year?
    Will that a...

  • Posted in thread: Sour Advice on 10-19-2012 at 09:53 PM
    Hi all-- I have been brewing beers for a while and I have been avoiding brewing a sour for fear
    of contaminating my other batches. It seems like whenever I go to a bar that has a sour
    available, I get...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS