Last Activity:07-01-2014 3:49 PM
Likes Given: 3
1 Likes on 1 Posts
Posted in thread: Portable RIMS project -ideas and help needed. on 06-30-2014 at 08:56 PM
Sorry to raise this thread from the dead. Very interested in this project as it'll scale very
nicely with my 1 gallon experiments to my 5/10 gallon production batches. Also, I've been
thinking about u...
Posted in thread: Where to go next? on 04-21-2014 at 10:56 PM
Thanks guys. Just to summarize:[*]Join a brew club( already looking at local clubs, Looks like
this is my closest club)[*]Look into kegging( I live in an apartment so I'll have to find a
nice compact ...
Posted in thread: Where to go next? on 04-21-2014 at 07:35 PM
Hey brew buddies, Been a while since I've posted on here. Have a question on where to go next?
Equipment upgrades, brew clubs, or what? I find myself a little bored, and overwhelmed with 5
gallons of ...
Posted in thread: Home Depot DIY Water Filter on 04-21-2013 at 07:32 PM
super clean! love it
Posted in thread: What to brew challenge on 07-17-2012 at 10:26 PM
Thanks guys, I'll have to try the apa since I'm not huge on dark stuff
Posted in thread: What to brew challenge on 07-17-2012 at 12:49 AM
Hey guys,Just found out that the local farm supply store has a megar selection of malts, hops,
grains, and other equipment. So here's the challege, using as many of the local supplies as
Posted in thread: Arduino and two elements on 06-12-2012 at 06:21 PM
The arduino will be connected to a temperature probe. The program will monitor the probe and
send a control to turn off the elements once the desired temperature is reached. Thats the
function of this...
Posted in thread: Arduino and two elements on 06-12-2012 at 03:50 PM
Are you saying throw a diode from the Arduino output, or on the relay coil?He's refering to D1
in your original diagram. It would appear that the relays you chose don't have that built in
diode. that ...
Posted in thread: Arduino and two elements on 06-12-2012 at 02:21 PM
N-channel fets are pretty straight forward, put voltage on the gate and current passes from
drain to source with a little voltage drop across the device.
Posted in thread: Arduino and two elements on 06-12-2012 at 06:25 AM
I would use mosfets instead of bjt's as the arduino pins are too fond of current being pulled