Last Activity:03-17-2012 11:04 AM
Likes Given: 7
1 Likes on 1 Posts
Posted in thread: Soda / beerline equation.. on 03-29-2013 at 12:57 AM
It depends on the pressure, but I dispense soda at 30 psi and it needs about 25' of 3/16" line.
With 1/4" line, you may need at least 50 feet per tap, but I"m not sure about that because the
Posted in thread: Can I use a beer or wine tap/faucet for dispensing soda? on 03-29-2013 at 12:53 AM
I can get beer taps to give good soda pours as long as I have the serving pressure set really,
really low.Lower it to about 5psi or lower. Just enough to push the beer out. Regular serving
Posted in thread: Johnson Controls Dig. Temp. Control Not Working? on 10-24-2011 at 12:31 AM
Just tried the lamp test, and it didn't turn it on.When I plugged it in it displayed "C03" or
"CO3" then did the thing where it flashes "Asd" and the temperature, and then seemed to operate
Posted in thread: Johnson Controls Dig. Temp. Control Not Working? on 10-23-2011 at 10:54 PM
Thanks for the replies! I'll give the test with the lamp a shot.I know it's not the freezer,
just because the freezer comes on when I plug it directly in the outlet without the controller
Posted in thread: Johnson Controls Dig. Temp. Control Not Working? on 10-23-2011 at 07:37 PM
Hey guys,I bought a Johnson Controls digital temperature controller from Northern Brewer about
three months ago. Worked great when I got it, but suddenly stopped working in the last week or
so. :( se...
Posted in thread: Danby 10.2 (DCFM289WDD) Keezer Build Thread on 10-07-2011 at 05:19 PM
The radiuses were done with a table belt sander and then finish work with a palm sander.
Basically:1) Butt join the boards - drill and temporarily screw together.2) Draw the radiuses
on top for each c...
Posted in thread: Danby 10.2 (DCFM289WDD) Keezer Build Thread on 09-02-2011 at 11:08 PM
Hey, looks great! I can't wait to see it finished and hooked up!The metal paint did a great job
of hiding the screw holes and joinery. It looks like a totally solid piece now. Really cool.I'm
Posted in thread: Why brewing kits? on 08-31-2011 at 03:53 PM
I started out using kits when I started brewing, because nobody I knew had ever done any
brewing and I was a complete novice. Since I had never done it before and didn't know about all
the internet fo...
Posted in thread: Danby 10.2 (DCFM289WDD) Keezer Build Thread on 08-29-2011 at 07:05 PM
Awesome! I look forward to seeing more pics of your build.I picked up one of these freezers
over the weekend from someone who was selling it on Craigslist for $190.They dropped it so one
of the feet i...
Posted in thread: Just bought Perlick 525SS Faucet Shank Combo w/ Knob $25ea on 08-28-2011 at 11:37 PM
Got my faucets & shanks in the mail yesterday.Order was 100% correct, everything about the
order went great. I only wish I'd bought more! :cross:Massive thanks to jetmac and everyone
else for bringing...