Last Activity:12-03-2013 12:56 PM
Posted in thread: How long to dry hop in the secondary? on 03-05-2013 at 03:26 PM
So from what I am reading, dry hopping for 5 day would get most if not all the aroma and flovor
I could get from the hops? I am fermenting an American Pale ale and going to dry hop with 2oz
Posted in thread: How long to dry hop in the secondary? on 03-01-2013 at 12:35 AM
So if I ferment in the primary for 7 days, transfer the beer to the secondary, let it sit in
the secondary for 2 weeks, and then dry hop the beer will it make any difference to how the
beer turns out?...
Posted in thread: How long to dry hop in the secondary? on 02-27-2013 at 04:33 PM
OK. I am going to dry hop for the first time and have some questions.When I transfer the
secondary, do I wait or can I wait a week or two to put the hops in the beer after transfering
to the secondary...
Posted in thread: Refrigerating yeast starter on 01-10-2013 at 04:50 PM
So it sounds like it would be fine if I don't use it until Sunday. Thanks for all the quick
responses. I am still hopeful that I can brew tonight as planned.
Posted in thread: Refrigerating yeast starter on 01-10-2013 at 02:50 PM
I have made up a yeast starter that is currently on the stir plate. I was planning on brewing
tonight but may not be able to due to a schedule change. If I put the yeast starter in the frig
for a few ...
Posted in thread: Boil times on 12-10-2012 at 03:51 PM
Yes, you do reach a limit. Over 60 minutes you do not get much additional bitterness; point of
diminishing returns.A lot of times 90 minute boils is to drive off DMS. Required mostly for
Posted in thread: Boil times on 12-08-2012 at 09:40 PM
So is there a point when you max out on the bitterness you can get from the hops?
Posted in thread: Boil times on 12-08-2012 at 06:39 PM
I am going to make the Sierra Nevada pale ale clone that was in the December 2012 issue of BYO
magazine and it calls for a 90 minute boil adding the first hops at the beginning of the boil.
What does ...
Posted in thread: Kegerator Conversion with Danby DAR440BL? on 11-04-2012 at 11:12 PM
JusticeAle and dinertime - either of you guys finish this build? I have the door off right now,
ready to do this, and just realized the same problem with the screws. I started going around
Posted in thread: Kegerator Conversion with Danby DAR440BL? on 10-11-2012 at 03:09 PM
Looking at my Frig, the only way you might fit a 10lb tank is if you only put one keg in the
frig. If all you have is a 10lb tank, just drill a hole in the frig and put it on the outside.
I have seen ...