Last Activity:08-06-2016 10:03 PM
Likes Given: 1
10 Likes on 10 Posts
Posted in thread: DeBrewer's Home Brewery on 07-10-2015 at 05:21 PM
I finally had a little time to work on the brewery this weekend. I finished up integrating the
waste water reservoir into the home plumbing. Since it is in the basement, there are no drains
in the flo...
Posted in thread: Brewers Hardware vs. Stout conical questions on 03-19-2014 at 11:17 PM
I just wish there was one more triclamp fitting through the wall to hook a carb stone to.
Thanks for the feedback beer beer!No problem. As far as the carb stone, you could always put an
elbow, sight g...
Posted in thread: Brewers Hardware vs. Stout conical questions on 03-14-2014 at 11:54 PM
any more thoughts beerbeer?I have put 4 batches through it now. Cleaning has not been an issue.
I have been putting a 2 gallon bucket under it and cleaning by hand. The large T/C lid makes
that easy. ...
Posted in thread: Filter or not filter on 02-27-2014 at 12:50 AM
I agree with others are saying. I have a 5 plate Marcon filter from days long gone that I
occasionally use. I like having the ability to filter, however it is a pain. You have to have a
clean, purged ...
Posted in thread: Does nobody use a grant? on 02-21-2014 at 03:02 AM
I won't brew without it. It just helps keep my brew day consistent. I don't have time for run
off issues. A grant alone won't necessarily prevent stuck mashes though. I have had plenty of
run off issu...
Posted in thread: crankenstien 3D issues... please help..... on 02-14-2014 at 12:05 AM
Are you sure that your drill has enough torque? I have the same mill and I cant run it with my
corded drill but with my makita with plenty of torque it is no problem. it just sticks with my
Posted in thread: BEST RECIPE TO KEG and DRINKING IN LESS THAN 3 WEEKS? on 02-12-2014 at 02:10 AM
I regularly turn Jamil's mild around in 14 days.
Posted in thread: Mash tun as hop back on 02-09-2014 at 04:24 AM
Depends on how exactly you use it. If you are running it at partial capacity in line on the way
to the chiller then I dont see why it wouldnt work. I spent quite a few years at a brewery
where we used...
Posted in thread: Brewers Hardware vs. Stout conical questions on 02-06-2014 at 02:22 AM
Posted in thread: Brewers Hardware vs. Stout conical questions on 02-06-2014 at 02:19 AM
I will post a few more thoughts about my brewers hardware conical soon. Just kegged my smoked
(briess cherry wood smoked malt) schwartz beer from it. Was a breeze.