Last Activity:10-11-2012 1:50 PM
Posted in thread: Upside down regulator ? on 05-02-2009 at 12:34 AM
I have a new two corny keg kit from Midwest and a Sanyo 4912 refrigerator. As it happens, I can
fit the two kegs, the CO2 tank, and the dual regulator in the fridge if I put the CO2 tank on
the left a...
Posted in thread: refractometer vs hydrometer on 02-11-2009 at 12:44 AM
I had bad experience with refractometer. They say it needs only one point calibration, 0 on
destilled water, but for mine it was not sufficient (i have cheap chinese ATC refractometer), I
was getting ...
Posted in thread: How much mash water when using rice hulls? on 12-16-2008 at 11:56 PM
I just put together a recipe using Beersmith. Having experienced a stuck mash last time, I
added a pound of rice hulls. So, I have 12.25 pounds of grain and 1 pound of rice hulls for a
total of 13.25 ...
Posted in thread: brewing with linux on 12-03-2008 at 07:08 PM
I run Beersmith on SUSE 11.0 using Crossover. It runs perfectly.
Posted in thread: oxygenation on 11-29-2008 at 12:39 AM
Somewhere (I'm not sure where) I read that you could get enough oxygen by shaking the carboy
for 15 minutes before adding the yeast. Previously I've shaken the carboy, but for less time.
Now I've done...
Posted in thread: Barack Obama Non Blond Strong Lager on 11-26-2008 at 12:45 AM
I made a Barack Obama American Brown Ale. The OG was higher than the style called for, as Obama
is a man with extra gravitas. We gave it away at the local Democratic club to people who made
Posted in thread: Belgian Dubbel Brew on 11-24-2008 at 04:47 PM
I did a PM dubbel a few weeks back. I used WL 500 and Saaz/Styrian Goldings hops. Pick up "Brew
Like a Monk" cool book.I just did a Dubbel yesterday. I more or less followed the recipe for
Posted in thread: Safale S-33 for Scotch Ale? on 10-27-2008 at 11:00 PM
I'm planning to brew a strong Scotch ale next weekend. Usually, I use an appropriate liquid
yeast for my brews. However, given the high OG for this style, it would be much easier to use a
Posted in thread: Pre-boil efficiency higher than post-boil??? on 09-18-2008 at 07:25 PM
First thing, how accurate would you say your volume meausurements are? If you were off +/- on
both measurements by say 1/2 quart, it's enough to move the numbers by a couple %. The other
varience as m...
Posted in thread: Pre-boil efficiency higher than post-boil??? on 09-17-2008 at 11:09 PM
I brewed an American brown ale this weekend. When I measured the SG pre-boil, I got 1.057 on
7.25 gallons, implying an efficiency of about 67% (disappointing). After the boil, I got an SG
reading of 1...