VIEW MY

beardedirishman

Gift Premium Subscription To beardedirishman

Join Date:

10-26-2010

Last Activity:

11-28-2013 9:29 AM

5 Likes on 4 Posts 

    ABOUT ME

  • Single
  • knoxville
  • tennessee

LATEST ACTIVITY

  • Posted in thread: Questions about March Pumps answered by the Factory! on 02-05-2013 at 07:21 PM
    Yeah, i went through this with another member that was trying something like
    this....unfortunately our pumps don't really make big pressure. First pump i have that can
    actually make 40psi would be our...

  • Posted in thread: Show us your portable travel kegerator/cooler. on 09-23-2012 at 02:36 AM
    Here's mine 76754

  • Posted in thread: Mobile kegerator on 09-02-2012 at 03:57 PM
    Is the basin really big enough for 3 kegs and ice? I guess if the kegs are already cold before
    the party, they might stay cold with minimal ice in an uninsulated metal tub. Either way, it is
    a work of...

  • Posted in thread: Mobile kegerator on 09-01-2012 at 11:54 AM
    Thought I would share my version of a mobile kegerator. It comes in handy for those fancy
    gatherings.74077

  • Posted in thread: Questions about March Pumps answered by the Factory! on 06-08-2012 at 01:14 AM
    I hope you dont have 3/4" tubing on the discharge side of the pump as well....the output can
    exceed the input and you can be running the pump in a starvation situation....as long as you
    have a 1/2" li...

  • Posted in thread: Questions about March Pumps answered by the Factory! on 06-06-2012 at 11:21 AM
    I have purchased a TE-5C-MD and will be using as a CIP pump for my conical fermenter. How big a
    difference in flow will I see between using 3/4" ID tubing versus 1" ID tubing. I am
    anticipating about ...

  • Posted in thread: Help! Buying an antique Kelvinator fridge to convert into a kegerator! on 04-16-2012 at 01:51 AM
    I disagree about the "wildly inefficient" comment.Mine only added another couple dollars per
    month to our utility bill, and it sits outside.I currently have 5 fridges/freezers in our
    house. 1 outside ...

  • Posted in thread: Valve-Orifice from Brewers Hardware Question on 04-12-2012 at 11:17 AM
    It's actually a ball valve i believe, but it does control flame size pretty well. I have one on
    each of my burners, and they're pretty easy to adjust to dial in my flame.

  • Posted in thread: Question for HP Propane automation on 04-04-2012 at 05:05 PM
    I found a needle valve on the pilots also helps to dial in the flame

  • Posted in thread: Questions about March Pumps answered by the Factory! on 04-03-2012 at 11:30 AM
    If you take the time, you can do it with just about any pump out there...what do you mean the
    mount is flimsy? the mounting base is metal just loke the 809 bases....are you talking about
    the motor bra...

0 COMMENTS
POST A COMMENT