Last Activity:09-21-2013 2:42 PM
Likes Given: 1
12 Likes on 9 Posts
Posted in thread: Pressure relef holes needed in brewstand? on 04-13-2013 at 05:50 PM
I just fired up my burner for the first time mounted on the brew-stand, and noticed that as the
stand heated up, steam started coming out o the open ends of the tube steel. This made me thing
of the e...
Posted in thread: Brewing some cream ale ...any advice. . on 04-07-2013 at 02:13 AM
Keep the wort all the way on the cool end of the yeast temp range during fermentation. Even
with a swamp cooler keeping the wort at around 65F, i ended up with a hint of spicy clove like
flavors I bel...
Posted in thread: bduane's Welded Single-Tier Brew Stand Build Thread on 04-07-2013 at 01:56 AM
Well, I decided to go with natural gas! I bought:1. Natural gas 1/2" ID flexible hose with
quick connect fittings with integral ball valve: nice about the quick connect with integral
ball valve is t...
Posted in thread: Natural Gas Calculations with Banjo Burner? on 03-27-2013 at 08:31 PM
A lot of views but no replies, after doing more research I will try to answer my own questions
for others, but don't consider me an expert!1. I am still under this impression. I have found
Posted in thread: Natural Gas Calculations with Banjo Burner? on 03-26-2013 at 04:24 AM
I've been doing a lot of reading, learning quite a bit, and thought it was about time I ask for
help to clarify and confirm.1. The limiting factor of output of a Banjo burner on natural gas
is the air...
Posted in thread: Low Pressure Propane Regulator? on 03-10-2013 at 04:24 AM
Most people who use Low Pressure mention various regulators that can be bought online, and
mention two stage.Will this one from Lowes / Home Depot work hooked up to a standard BBQ
propane tank? Or is ...
Posted in thread: bduane's Welded Single-Tier Brew Stand Build Thread on 03-10-2013 at 01:10 AM
Finally making some progress on this project, have a question about the gas plumbing to my new
BG14 Banjo Burners.I bought this gas connector at Home Depot per the HD employee saying it will
Posted in thread: Single Tier, 3 Pump, BCS-462, Automated Rig on 01-01-2013 at 04:38 PM
Yes, it is 1/2" SS tubing w/ Swagelok compression fittings.A lot of the pictures aren't loading
right now, so not sure if this was in the drawing, but what length SS tubes did you end up
using? I ask ...
Posted in thread: bduane's Welded Single-Tier Brew Stand Build Thread on 12-17-2012 at 01:17 PM
Finished welding the frame! Next up is figuring out how I want to do my kettle supports, burner
mounts, pump mount, and casters!
Posted in thread: bduane's Welded Single-Tier Brew Stand Build Thread on 12-17-2012 at 01:13 PM
I found with the higher voltage setting it was tough to get good welds without burning through
at the edges. I found using my current setting recommended by the chart on the welder worked
better if I ...