Last Activity:10-21-2016 10:37 AM
Likes Given: 2
15 Likes on 13 Posts
Posted in thread: Who makes custom kettles with TC port ON BOTTOM? on 10-15-2016 at 10:11 AM
Or. just cut the bottom off of a keggle and get the kit from Bobby
Posted in thread: Keg outside for a party, how to control temp on 10-10-2016 at 01:10 AM
I'm hosting a movie night and planned to move a keg from my keezer to the back yard. I planned
to put the keg in a 5g bucket with some ice and use a picnic tap and a small co2 tankHow do I
make sure I...
Posted in thread: Power and Nothing Else on 09-27-2016 at 09:29 PM
Yes. I'd get a volt meter and check your hot to hot and hots to neutral
Posted in thread: Co2 leaking from tank PRV? on 09-20-2016 at 12:05 AM
I went and exchanged it. The leak was actually where the valve threaded into the tank.
Posted in thread: Co2 leaking from tank PRV? on 09-17-2016 at 10:33 PM
I have a new to me co2 tank (exchange). I've had a keg carbonating in the corner for at least a
week. Tonight I walk by it and I hear hissing. I get out the starsan and start spraying. It
seems like i...
Posted in thread: Question about Regulators on 09-17-2016 at 12:29 AM
fwiw, might want to check the minimum differential specification for the secondary regulator,
as many specify 5 psi minimum.Otherwise, that's a legit configuration...Cheers!That was my
Posted in thread: Question about Regulators on 09-16-2016 at 07:40 PM
Never mind. Re-read the question
Posted in thread: WTS Greenlee 1 7/8 Punch and Gas Mixer on 09-11-2016 at 11:19 AM
Interested in the blender. It looks like the use case is co2+compressed air vs nitrogen+co2.
Did you research the viability? Emailing as well, but wanted to get other members opinions
Posted in thread: 650ss and short lines. Burp at first pour then fine on 09-02-2016 at 12:50 PM
I have 650ss taps and have my lines shortened down to 3 or 4 feet. My first pour is foamy. I
can put that aside and then get a great pour. I wonder if this is due to temperature
differences. Since I g...
Posted in thread: Keep Breaking Sight Glass - Solutions? on 08-21-2016 at 11:09 AM
That crack is not due to impact but more likely due to PBW exposure. Do you leave PBW or
Oxiclean in there overnight?Bobby beat me to it. I put my sight glass on a triclover fitting
for easy removal