Last Activity:03-16-2014 9:13 AM
1 Likes on 1 Posts
Posted in thread: DIY Networked Arduino Dual stage temp. controller w/ logging/graphing on 03-14-2014 at 08:54 PM
This is one of the PHP files that lives on your Raspberry Pi. You'll just need to change the
username/password to match your database username/password. is the bit of code that deals with
Posted in thread: DIY Networked Arduino Dual stage temp. controller w/ logging/graphing on 03-14-2014 at 02:10 PM
Hi! As far as the LCD goes. Here's how you wire it up. Important: Wire +5V and GND to the
shield pins shown in the pictures! The GND pin next to the 5v pin is NOT connected. You must
use the one next ...
Posted in thread: DIY Networked Arduino Dual stage temp. controller w/ logging/graphing on 03-13-2014 at 09:46 PM
Hmmm.. BrewPi. I'm going to have to have a look at their code and see if there's anything I'd
like to "Borrow." ;)I would be interested in taking a look at your code as well! I basically
Posted in thread: My Brew Cart build on 01-06-2014 at 01:25 AM
Digging the LSU!!
Posted in thread: StrangeBrew Elsinore - Raspberry Pi based brewery controller on 12-27-2013 at 09:07 PM
I have a noob question, I got my Pi setup and copied the github files, etc. when I open a
browser and type in my raspberry pi ip example (220.127.116.11:8080/control) I get a page cannot be
displayed. If I l...
Posted in thread: 400x300x200 Metal Enclosure w/backplate on 12-25-2013 at 02:29 AM
I will jump in line after RTL, shipping to 70769 please?
Posted in thread: It's Finally Done: My 10-tap Keezer! on 12-23-2013 at 02:10 AM
I like those tap handles, what kind are they?
Posted in thread: BCS460 and flash buzzer wiring on 12-01-2013 at 11:53 PM
Posted in thread: BCS460 and flash buzzer wiring on 11-30-2013 at 08:02 PM
I am getting real close to wrapping up the planning stages of my bcs-460 build and need to
order the last few parts. I would like to incorporate a flashing buzzer into my build,
something like this: ...
Posted in thread: 110v Recirculating eBIAB 2.5 gallon batches on 11-24-2013 at 07:23 PM
I don't have a drawing for a system as you describe using the BCS460. IMHO, the BCS460 is a
fairly expensive and complex product to be used for such a setup. When you are positive that
this is your pl...