Last Activity:02-05-2016 7:09 PM
Likes Given: 8
21 Likes on 15 Posts
Posted in thread: Blending beers on 01-27-2016 at 09:23 PM
I try it often depending on what's on tap. Be warned, it can be dangerous! Playing around with
different ratios of each beer is interesting, but before you know it 3 pints have gone down and
you have ...
Posted in thread: Tri Clover Carbination/Gas Fitting on 01-22-2016 at 02:41 PM
This should work for you?
Posted in thread: Brewing outside in the Winter on 01-20-2016 at 07:24 PM
All this talk about hooking up chillers when it's below freezing. Put the lid on at flameout
and walk away for 4-5 hours. Boom, pitching temp.I started doing this, makes brewing in winter
a lot easier...
Posted in thread: Building a Grant on 12-30-2015 at 02:34 PM
How much space is there under the false bottom in your mash tun? I have a similar setup to
yours, there is over 2 gallons of dead space under the false bottom. That dead space works more
or less as a ...
Posted in thread: Weldless bulkhead to replace heating element. on 12-22-2015 at 06:56 PM
A 1" to 1/2" will not work? I can't remember what size thread the elements are.
Posted in thread: Weldless bulkhead to replace heating element. on 12-21-2015 at 08:30 PM
Get a reducer bushing to fill the hole.
Posted in thread: Using RIMS to boil on 11-26-2015 at 05:32 PM
Why not add the 2nd element in the kettle, unplug the RIMS and use that outlet to run it?I'm
similar to you with a 20A circuit to power a 2000W HLT, and 15A circuit to power a 1375W RIMS.
When I conve...
Posted in thread: What do you drive? on 11-12-2015 at 01:47 PM
You sir, are doing it right. We have found that 2 turbos in the family makes for a happy
marriage. I just wish I could do some work on the outback xt. Would love to bring it up to my
Posted in thread: What do you drive? on 11-11-2015 at 09:19 PM
The wife does joke about that with the outback. Not so much the wrxMy wife drives an Outback
and likes to do the lesbian wave to other Outbacks. It's a decent car, kept us away from the
Posted in thread: Counterflow chiller and Cold break on 11-11-2015 at 07:25 PM
I pump through the counterflow chiller and back into the kettle. Once the temperature is down
to 120ish in the kettle I shut off the pump for 10 minutes to let everything settle. Then pump