Last Activity:08-01-2014 3:01 PM
Posted in thread: Miscellaneous Equipment on 04-04-2014 at 03:19 PM
Happy to take the other PIDs and both temp probs if you are willing to ship. Let me know how
much to 94611.
Posted in thread: Pilot light scorched mash in RIMS? on 03-20-2014 at 01:25 AM
Can you put a "hood" or "shroud" over it, and make a close fitting hole for the thermocouple to
fit through?Keep the hood high enough to not obstruct the flame path to your burner, and use
some of the...
Posted in thread: Pilot light scorched mash in RIMS? on 03-19-2014 at 07:16 PM
Sorry for the bad picture, don't get home early enough for daylight. My stand lives out side so
the plastic is knead-able eraser to keep spiders and what not out of my gas plumbing.In short,
Posted in thread: Pilot light scorched mash in RIMS? on 03-19-2014 at 06:16 AM
First off, thanks HBT for all the valuable information. I've drawn heavily on this forum
assembling my brutus 10 clone (thanks for the awesome plans Lonnie).It's taken me ages to get
my rig up and run...
Posted in thread: E Control Panel Parts -r ecept, plugs, switches etc. on 03-05-2013 at 06:44 AM
Posted in thread: Anyone have a good carrot cake beer recipe? on 06-06-2011 at 06:37 AM
contemplating making a batch of this for a friend.sfrisby, how did it turn out?
Posted in thread: Carboy/ Keg Cleaner Giveaway on 05-27-2011 at 07:34 PM
Posted in thread: nipple inside welded keggle pipe? on 03-11-2011 at 02:43 PM
yep Raider, my mistake. A chamfer bit. thanks for all the help again.
Posted in thread: nipple inside welded keggle pipe? on 03-11-2011 at 04:15 AM
thanks for the input. Tools are somewhat limited, but there is a local tool library or renting
if need be. Suggestions for a cheap reamer bit or whatnot are appreciated. but you all have
Posted in thread: nipple inside welded keggle pipe? on 03-10-2011 at 04:25 AM
I was hoping to not have to find a welder if possible. But if that's the best bet I can look
into finding one in the area.Any thoughts on setting up a "weld-less" nipple and o-rings inside
the welded ...