Last Activity:06-25-2013 12:45 PM
Posted in thread: Lots of particulates in yeast packet and container on 02-26-2013 at 11:19 PM
Allright cool, sounds good. First time I've used this yeast, so just a little surprised. Thanks
Posted in thread: Lots of particulates in yeast packet and container on 02-26-2013 at 10:40 PM
So I made a yeast starter last night using Wyeast 1968 London ESB liquid yeast packet, and when
I poured it into the flask I noticed there was a lot of solids at the bottom. The smack pack
was pretty ...
Posted in thread: Using milk to stick on labels? on 06-04-2012 at 03:26 AM
Posting so I can find this later
Posted in thread: Re-bottling some oktoberfests (any issues?) on 05-30-2012 at 02:16 AM
Hello all,I bottled some Oktoberfest last Thursday, and unfortunately have used some wrong
bottles with them (11 total). I want to re-bottle them using normal, blank bottles from a local
Posted in thread: Lager yeast starter and fermenting temperature questions (Oktoberfest) on 02-24-2012 at 05:27 PM
Everything else is preference, but if I were trying to make the best beer possible, I would
make the starter well in advance so you have plenty of time to crash the starter, so you can
decant the spen...
Posted in thread: Lager yeast starter and fermenting temperature questions (Oktoberfest) on 02-23-2012 at 04:54 PM
Thanks for the advice, osagedr.
Posted in thread: Lager yeast starter and fermenting temperature questions (Oktoberfest) on 02-23-2012 at 01:46 AM
Hello all, I have a couple questions regarding doing an Oktoberfest.Allright, so I already did
a pretty simple batch of Oktoberfest. This was the first yeast starter I made, so I hope I did
it right. ...
Posted in thread: HomeBrewTalk 2012 Big Giveaway on 02-21-2012 at 08:04 PM
Lemme get some of that free stuff
Posted in thread: Installing toys in the brewpot on 01-27-2012 at 06:40 PM
I have that pot and I put a sight valve/thermometer in it from brewhardware dot com. Works
great and very cheap. The sight glass should be as low as possible, the limiting things being
where the bevel...
Posted in thread: Installing toys in the brewpot on 01-27-2012 at 05:03 PM
Hello all,Here is my brewpot: a 10 gal stainless steel one, and it's dimensions are 12" tall
and about 15.75" in diameter. I am about to install three things:[*]Drain