VIEW MY

bach

Gift Premium Subscription To bach

Join Date:

08-08-2010

Last Activity:

08-24-2014 9:20 AM

1 Likes on 1 Posts 

    ABOUT ME

  • Minneapolis
  • Single

LATEST ACTIVITY

  • Posted in thread: Spike Brewing 12.5gal Conical Fermenter Giveaway! on 08-18-2014 at 01:54 PM
    I am in as well!

  • Posted in thread: Speidel Braumeister (brewmaster) on 11-01-2013 at 02:34 AM
    again, I do not think, that it is a big deal for us.I was just wondering, if anybody noticed
    the dripping.HSA is a recognized problem more on a commercial level, where the beer should
    remain fresh on ...

  • Posted in thread: Speidel Braumeister (brewmaster) on 10-31-2013 at 05:58 PM
    Check out John Palmer's book, Chapter 6 - Yeast 6.9.3 Aeration is Good, Oxidation is Bad. I try
    to minimize the aeration after the boil until the wort is below 80F.Sprouthog,Big John says,
    what we all...

  • Posted in thread: Speidel Braumeister (brewmaster) on 10-25-2013 at 03:34 PM
    Hi guys,any of you concerned about hot side aeration ?With the RIMS there is hot wort dripping
    down from the malt tube ..I never had badly oxidized beer from BM (done close to 100 batches on
    20L)But j...

  • Posted in thread: Speidel Braumeister Modifications on 02-26-2012 at 04:02 AM
    For those of you wanting to order this from this company. They do not sell to the general
    public but only to companies. If you want to purchase, you need to got thru a dealer.Correct -
    call ADAPT ALL ...

  • Posted in thread: Speidel Braumeister (brewmaster) on 02-23-2012 at 05:59 PM
    I am attaching the pictures of the connector I used:

  • Added a new Photo on 02/23/2012

  • Posted in thread: Speidel Braumeister (brewmaster) on 02-22-2012 at 04:05 PM
    Yes it is SS9007 12-8The BM side of the nipple is the 3/4" BSPP/ISO (british standard pipe
    parallel) and the ball valve side is the 1/2" NPTMy reason was to eliminate any parts, which
    would be restric...

  • Posted in thread: Speidel Braumeister (brewmaster) on 02-22-2012 at 03:08 AM
    Just an update on the spigot replacement.I used this piece. It was pricy but connects right
    into 1/2NPT Ball valve. got the stainless steel.

  • Posted in thread: Speidel Braumeister (brewmaster) on 02-14-2012 at 05:39 PM
    Thanks for Swagelok website.Ralph from Speidel BM emailed me that the Tap for 20L unit has G
    3/4" cylindrical(=non tapered) thread.G 3/4" is also called BSP(british standard pipe) and on
    couple of web...

0 COMMENTS
POST A COMMENT