Last Activity:02-28-2013 8:06 PM
Posted in thread: My new ferm fridge made with a STC-1000 on 01-28-2013 at 06:45 AM
My fridge, being so old, you cant set the freezer and fridge to different temps. I place the
probe on the carboy and set the temprature to what ever i need it at. The freezer portion is
approx 20 degr...
Posted in thread: Unveiling my brewery & garage build on 09-12-2012 at 01:42 AM
subscribed. good work
Posted in thread: My new ferm fridge made with a STC-1000 on 09-12-2012 at 01:00 AM
I got the fridge for 10 bucks on craigslist. controller on Ebay for $20 then $30 in parts at
Lowes and I'm good to go. I took pictures of the controller build. I took a scrap piece of
plywood and moun...
Posted in thread: ESB FG seems too low on 05-29-2012 at 09:50 PM
you scared me for a second there haha. I was like i thought that was actually a little on the
low side. Temp reading were at about 70 and i took into accound the small difference. I
actually ran and c...
Posted in thread: ESB FG seems too low on 05-29-2012 at 07:19 PM
O.k. here are some numbersGrain Bill1/2 lb 60L9 lb 2row1 lb 90L3 gallons of strike water washed
in at 160. I added the 5.2 ph stabilizer and at 30 min the PH was 5.0 and the temp was 154 in
Posted in thread: ESB FG seems too low on 05-25-2012 at 04:08 AM
I did my first all grain and the OG was a 1.040. after primary and secondary the FG is 1.002.
target was about a 1.014 i think. Is that from a bacteria or wild strain of yeast?10.5 lbs of
grains and t...
Posted in thread: starter looks funky. on 03-13-2012 at 11:30 PM
Cool. Thanks for the quick replies
Posted in thread: starter looks funky. on 03-13-2012 at 11:22 PM
Correction... It's the white labs wlp002 English ale yeast
Posted in thread: starter looks funky. on 03-13-2012 at 11:19 PM
So I did my starter like normal. About 3oz of dme. Boiled it, cooled it, pitched a wyeast
English ale yeast. On the stir plate it looks like it is curtled. When I stop the spin all the
clumps fall dow...
Posted in thread: Welders on craigslist - need guidance on 01-27-2012 at 03:41 AM
I used to have a welder (sold it to buy an ar15) and i used it when i put airbags on my truck.
It was a lincoln sp135. It worked awesome i could do 1/4" with the flux core all the way down
to sheet me...