Last Activity:09-18-2013 6:56 PM
Posted in thread: Blichmann Burner not igniting. Help! on 08-12-2012 at 12:48 AM
Thank you for posting this, since I just ordered the burner!Yeah, I figured someone else might
have the same kind of problem.I'm brewing my first brew with it tomorrow. I figure it'll be a
few brews b...
Posted in thread: Blichmann Burner not igniting. Help! on 08-11-2012 at 10:49 PM
I guess I can now answer my own question...Turns out there was a minor problem with the cast.
The cast iron burner part was "clogged" (so to speak) with a thin layer that was keeping the
gas from flow...
Posted in thread: Blichmann Burner not igniting. Help! on 08-11-2012 at 10:08 PM
I received a Blichmann Floor standing burner and I'm having problems igniting it.I turn the gas
on, I can hear it but the burner doesn't light and after a few seconds, Istart smelling propane
Posted in thread: First brew mistake? on 03-12-2012 at 03:43 PM
you will need to put it in the beer and suck on the end until the entire length is filled with
beer and cap the end with your thumb..No, definitely don't do this. Instead, fill the sanitized
Posted in thread: State of the hops growing industry, 2012 on 02-07-2012 at 04:56 PM
Upvote!Thanks for the info!
Posted in thread: Wyeast Wyeast Kolsch 1 month primary-extremely cloudy on 01-26-2012 at 10:17 PM
If it's worth anything, I'm also brewing a Kolsch with the same WYeast. I fermented it in a
plastic primary fermenter for about a week at about 20C (68F) and then, very carefully,
transferred it to a ...
Posted in thread: Wort Chilling Question on 01-19-2012 at 10:10 PM
Plastic is a poor conductor of heat. It will take too long to chill 5 gallons in your bucket.
You'll do better to chill your two pots separately in an ice bath (don't go skimpy on the ice!)
and ad the...
Posted in thread: Wort Chilling Question on 01-19-2012 at 10:06 PM
Yes. This is what I do.I boil my wort in two stainless steel crock pots and, despite the hassle
of dealing with two pots, they start boiling faster than one big pot.Anyhoo, I also use a hard
Posted in thread: Filtering Hops Before Fermentation on 01-16-2012 at 05:49 PM
What jumertens said.I try my best to filter as much hops out when I transfer the wort to my
fermenter, I have a stainless steel, mesh thingy that does a pretty good job but, yeah, little
bits can stil...
Posted in thread: beersmith down help me please haha!! on 12-31-2011 at 09:29 PM