Last Activity:10-12-2016 12:29 AM
1 Likes on 1 Posts
Posted in thread: 5/8" OD Silicone Tubing Question/Problem on 08-11-2012 at 09:13 PM
Thanks for all the responses. I was able to get this tuned a little bit better by throttling
the output of the pump as suggested. I'm going to try this with very hot water tomorrow to see
what kind of...
Posted in thread: 5/8" OD Silicone Tubing Question/Problem on 08-11-2012 at 02:04 PM
So I purchased about 20' of silicone tubing a few years back and cheaped out and went with 5/8"
OD from US Plastics. It's worked perfectly with the occasional kinking. This was only with
gravity fed s...
Posted in thread: NG Needle Valves for Flow Control on 03-31-2012 at 02:23 PM
Thanks for the feedback everyone.Just to clear up any confusion:I picked up this Burner and the
NG Conversion Valve both from Williams Brewing.@Day_Trppr - I really wish I had seen that offer
Posted in thread: NG Needle Valves for Flow Control on 03-30-2012 at 09:28 PM
I have read a ton of threads on this and can't really make up my mind on some of the hose
connections on my stand.I currently have 3 BG-14 NG burners that I am going to mount to a new
stand.I have the...
Posted in thread: Ranco Temperature Controller Failure on 03-03-2012 at 02:59 PM
Unfortunately the wrong thing is toast. Looks the keezer is on it's way out. Been plugged into
the wall for 24 hours and is still parked at 48 F. I guess it's going to turn into a
Posted in thread: Ranco Temperature Controller Failure on 03-02-2012 at 06:46 PM
Yeah, i opened it up last night and re-set all of the terminals.I'm thinking it's toast.
Posted in thread: Ranco Temperature Controller Failure on 03-02-2012 at 03:42 PM
Has anyone had one of these fail on them?I purchased a chest freezer about 5 years ago that
already had the conversion done using the Ranco ETC111.I had no problems with this in the past
5 years and a...
Posted in thread: Designing a new brewery and need a cad file on 02-28-2012 at 05:47 PM
Did anyone get these models and can provide a link and/or download?
Posted in thread: Fish Tank Stand for Brew Stand on 02-26-2012 at 09:17 PM
I think this is a good idea, and even if I have to get this done at a machine shop it won't be
too much work. 6' sticks of that angle are only 15 bucks from mcmaster.Mine already has a
Posted in thread: Fish Tank Stand for Brew Stand on 02-26-2012 at 09:06 PM
I def. have access to local shops that can do this work if I need it. My boss has a welding
setup that he's always looking for an excuse to use.I don't have all 3 kegs yet, just my single